• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Works at Retired Professors

Dr Stan

Member
Local time
11:51 AM
Joined
Apr 8, 2021
Messages
6
Reaction score
12
Location
Owensboro KY
Retired professor of Industrial Tech and Manufacturing Science. Started life as a job shop machinist and tool maker starting the trade as a Machinery Repairman in the USN. Worked in various job shops then started teaching in a vocational school. Eventually earned a doctorate and taught at four different colleges and universities. Have a 24X48X12 ft shop in my backyard with a just installed Nussbaum two post lift, well equipped machine shop, welding and wood working equipment. Raised the roof four feet in order to install the lift. Note to everyone, always, ALWAYS, build it higher than you think necessary.
 
Welcome from Ct. See you have a 66 Satellite convertible, got one myself.:thumbsup:
:xscuseless::lol:
 
Welcome from Georgia.
 
Pictures or its just a large tent !
 
welcome.png
:xscuseless:
 
Welcome from another machinist in AZ...
 
Welcome from Alabama, tell us what you have in that shop besides the lift and raised roof. Need pictures of what you are working on too.
 
756DECB1-B148-4074-8717-443772084390.jpeg
2D43DD92-9876-4F3B-BCDB-406A1B1D8B81.gif

@Dr Stan What’s up doc? Here’s another NJ welcome! What kinds of Mopar’s do you have?
 
Careful.....

It almost sounds like you're volunteering.
 
Welcome from Missouri!!
 
Pics will come as I will be documenting the rebuild. Right now it is covered with tarps as it had to sit outside while I was modifying my shop.
 
Hello from WI - yes - I didn't build the ceiling in my garage high enough and regret it every time I have to work under my car...the older I get the more I regret it...
 
Auto Transport Service
Back
Top