• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

62 Plymouth sedan rear seat lower cushion fit ?

R

rustytoolss

Well-Known Member
Local time
10:45 AM
Joined
Mar 4, 2018
Messages
635
Reaction score
206
Location
New Franklin, Ohio
Can any post a picture of how the lower cushion fitment where the lower cushion comes in contact with the bottom of the upper cushion (were your seat belts would come through) My car is a wagon, but think the lower cushion is the same for sedan. There is a gap area just above the driveshaft tunnel. I dont know if the was an early/late lower seat cushion...maybe.
 
64 wagon.

20180727_191219.jpg
 
On my Dart 2 door, I had to fix the upholstery job done when I got it back.
The back cover was too high up leaving a gap and exposing the staples.
Also my lower seat frame was rotted and 'fixed' but I found and replaced with a good frame.
After that, I fixed it without any issues.

20210829_204058.jpg


20220423_160039.jpg
 
The frame could be bent, broken, or rusted.
The factory put a large piece of foam under the center section of the seat, but I never understood how that could have added any additional support.

Maybe junior used to stand there when riding in the back with no seat belt.
 
matthon said:
The frame could be bent, broken, or rusted.
The factory put a large piece of foam under the center section of the seat, but I never understood how that could have added any additional support.

Maybe junior used to stand there when riding in the back with no seat belt.
Click to expand...
The seat frame is in good condition, did not know about extra foam under the center. Is your lower seat frame straight acrossed the back...mine has an area at that point shaped like the gap...was made that way. might be 62 thing only ?
 
My 62 back seat bottom frame.
This came out of my 4 door parts car, which I used to replace the rusted one in my 2 door, they were identical.

In pic frame is upside down.

20211023_173411.jpg
 
My vert has a gap between top and bottom - never quite looked right, not sure why it is like it is...
 
You must log in or register to reply here.

Similar threads

R
62-65 B body wagon question ( rear seat)
Replies
1
Views
424
rustytoolss
R
Sixpaksteve
Patience, Persistence, and Luck
Replies
9
Views
1K
davek
davek
Offender
  • Locked
SOLD 1968 Sport Satellite Convertible Resto Mod project
Replies
0
Views
2K
Offender
Offender
G
  • Locked
FOR SALE Upper rear seat frame
Replies
0
Views
615
Gus chiggins
G
Maxrat
66 Charger Interior Installation Step by Step
2
Replies
21
Views
7K
firstgenfan66!
firstgenfan66!
Auto Transport Service
Back
Top