1969 Charger 500 grill pictures

SKR8PN · Jun 13, 2025

Real long shot but gotta ask. Working on a 1969 Charger 500 with the flush mounted grill. I need to see some pictures of how the filler panel that fits between the headlight bezel and fender fits. This car was missing them but I just found an NOS set of the fillers and the mounting brackets. Just need to get some idea of just how they were located and fitted back in the day. TIA..

#41 · Jun 13, 2025

I have a C500 and can take off the headlight bezel and post some photos. But to make sure I address your questions, what specifically do you mean by "fitted"? Is there something specific that does not look right?....... because there is really only one way they can be installed.

Bg71361 · Jun 13, 2025

Here's a picture from a 500 in the wild! Don't know if it helps.
Good luck!

SKR8PN · Jun 13, 2025

#41 said:
I have a C500 and can take off the headlight bezel and post some photos. But to make sure I address your questions, what specifically do you mean by "fitted"? Is there something specific that does not look right?....... because there is really only one way they can be installed.

The pieces I have, have a rubber strip around the outside edge where it contacts the fender. I need to see how far back from the edge of the fender those pieces fit.

#41 · Jun 13, 2025

This is an original untouched car. The rubber is pushed all the way back onto the filler piece and will be right up against the fender.

SKR8PN · Jun 14, 2025

That is exactly what I needed to see!! Thanks very much for the info!

1969 Charger 500 grill pictures

SKR8PN

New Member

#41

Well-Known Member

Bg71361

Member

SKR8PN

New Member

#41

Well-Known Member

SKR8PN

New Member

Similar threads