Anyone have a plastic blower motor squirrel cage for a heater only car for sale? It’s stamped with part number 2837679. It’s from a 70 e body and measures approximately 4 3/8 across and 2 3/8 tall. I have one very close to the same size out of an abody but not as many fins and is metal. Thanks in advance. Mark
FOUND Need blower motor cage for 70 ebody heater only car
- Thread starter Sedbld
- Start date
- Status
challengersteve
Well-Known Member
The e body could be either plastic or metal depending on year
ply64post
Seinor Member
I went trough my parts books, the part# is 22277597 is use in E Bodies from 70 to 73 and A Bodies from 65 to 73. Vendor suppliers may have different versions through the years but same part#. There are times that part#'s and casting #'s don't match. This wide a window should help you locate one.
Hope this helps
Jeff
Last edited:
Thanks Jeff for the legwork. Really appreciate it. I got one out of an abody heater only box but guy didn’t remember what year it was from. It was stored in a fully packed shed and had been there for years. It’s a metal one that’s extremely close to the diameter and same height but it’s got less blades. Definitely from a different supplier. Don’t know if that would make less cfm than the original one? That’s the only reason I am seeing if anyone has the plastic one. If I can’t find a good used one I’ll probably just use it.
- Status
Similar threads
