crusty 66
Member
Anyone know a good source for the orings that go on the heater core to seal the heater core and the firewall tubes? My universal oring kit orings are too fat or too thin. Also should they be oil resistant like an ac oring?
66 ac heater core tube orings.
- Thread starter crusty 66
- Start date
Any standard A/C o ring should work. (proper size of course) They should be the green colored ones.
A standard o ring should work fine. Coolant only has 15# of pressure and 220° temps.
If you find any of the repop suppliers that sell them, it is a very slim chance they are made specifically for that application.
c body convert
Active Member
when I got the complete a/c heaterbox rebuild kit from Detroit Muscle Technologies it came with them, but I have no idea if they'll sell them separately
- Local time
- 9:44 AM
- Joined
- Jul 1, 2015
- Messages
- 6,472
- Reaction score
- 8,062
I thought that "O" rings were sized by: outside dimensions (OD) X inside dimensions (ID) X cross section thickness X elastomer type....Viton, Teflon, etc and service extremes.........just my thoughts......
BOB RENTON
Similar threads
