• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1968 Dodge Charger Build

RJ Squirrel said:
Welcome! I am doing the same thing, spent most of 2025 rebuilding the shell, now working on grill/dash etc waiting on warmer weather for paint.
Fun project!
Click to expand...
Awesome, that is where I am going to be when I get the suspension and steering back in the car. I will move into getting my dash rebuilt. Any reccomendations on what paint to use for the Pads, and black/chrome bezel pieces? I as just going to clean it all up and get some paint markets, spray paints.
 
HeavyDanger said:
Awesome, that is where I am going to be when I get the suspension and steering back in the car. I will move into getting my dash rebuilt. Any reccomendations on what paint to use for the Pads, and black/chrome bezel pieces? I as just going to clean it all up and get some paint markets, spray paints.
Click to expand...
Just ordered 2 Molotow chrome pens, have not tried them yet but they seem to get the best reviews. I am using SEM trim black on all the interior plastic and pads. Or SEM Landau black works good too. Using adhesion promoter on all plastics too.
 
Well, got my doors off today. Decided to drill a few holes through each bracket 1/8 so that I could use them to try and line the door back up after paint. Looks like I will need to order some new pins as well which I will order shortly. Looks like these just bang upwards and have x2 washer / bushings.

1769573597182.jpeg


1769573633892.jpeg

1769573697401.jpeg
 
Getting the last of my body work items handled before she goes for paint in about a month. I started looking at the rear bumper brackets, the valance and tail panel holes don't line up perfect after getting the body squared so I'll need to get everything mocked up. Any tips / tricks anyone have on this part?

1769574091663.jpeg
1769574120956.jpeg
 
HeavyDanger said:
Getting the last of my body work items handled before she goes for paint in about a month. I started looking at the rear bumper brackets, the valance and tail panel holes don't line up perfect after getting the body squared so I'll need to get everything mocked up. Any tips / tricks anyone have on this part?

View attachment 1984621View attachment 1984624
Click to expand...
Yep had that on my 70 charger. Tac the corners on your quarters before you weld the lower valance.

imagejpeg_0 (16).jpg
 
Got to see my Fenders done yesterday, sooooo happy like a mirror! Almost emotional seeing it come back to life after so long.

1770058705930.png

1770058724390.png

1770058740264.png
 
Through some new bushings, primed, painted K-Member and bolted her back in. Ordered all the tie-rods, ball-joints etc. but I decided to wait till I am at the engine stage to redo the suspension. This is good enough for a roller to paint in March.

Just going to deal with that bumper bracket mounting for the rear and scuff the rest of the interior and start working on the dash.

1770226400346.jpeg
 
Well used a step drill and sorted out the mounting for my bumper. Just quickly mocked it up, didn't want to have to do much work in that area once paint was on it even though it is hidden. A few more little odds and ends and she is off for paint!
1770268089197.jpeg
 
RJ Squirrel said:
Looks like my shop! I just did the fitup on my tail end too

View attachment 1989717
Click to expand...
Bigger the shop the more room for junk it always seams! That looks fantastic! I wasn't sure where the bumperettes bolted. I need to find that top chrome piece and the (2) that go between the lower tail-lens they didn't come with the car sadly.
 
Looking for some help, so I will be getting some of my Parts back from Paint in the next few weeks before the body goes in March for Interior / Exterior finish. With that in mind I have been going through the boxes of Parts the car came with (again it was torn apart 17+ years ago when I got it so I didn't take it apart). Anyways, have a look at the photo of window parts (I also found 3 more of the little motors / coils in another box not in this photo) What am I looking at here, what am I possibly missing? This part seams very daunting to me so any suggestions on best way forward is appreciated. (Power window car)

1771205692131.png
 
You need to get a factory service manual and identify the parts, it shows it all. I see an auto trans shifter rod guide for a console shifter on the bottom right. Its a daunting task to reassemble a car especially one you didn't take apart. if you can't find out what the part is, ask, someone on here will know, stay steady it will get done, good luck.
 
You must log in or register to reply here.

Similar threads

R
  • Locked
SOLD 1968 Dodge Charger grill mounting parts
Replies
1
Views
134
1970 Roadrunner
1
KohrtRacing
Offseason Build Thread - Project 68 Charger Race Car
2
Replies
20
Views
1K
KohrtRacing
KohrtRacing
R
  • Locked
SOLD Right side 1968 headlight bezel Dodge charger
Replies
0
Views
147
robert horman
R
P
1968 Dodge Charger body
2
Replies
23
Views
1K
RJ Squirrel
RJ Squirrel
DeltaV
For Sale: Not Mine 1968 Dodge Charger R/T in Alabama for $38,000
2
Replies
26
Views
1K
QuickBpBp
QuickBpBp
Back
Top