MoparEd
Well-Known Member
I got my new door panel from Legendary:icon_super: and no instructions. So how do one put the new door panels on the metal door frames:confused:
installing new door panels on frames
- Thread starter MoparEd
- Start date
pushrod
Well-Known Member
I used one of my air staple guns. I think it was the 3/8"narrow crown and upholstry adhesive.
Propwash
Well-Known Member
- Local time
- 10:06 PM
- Joined
- Oct 29, 2009
- Messages
- 9,711
- Reaction score
- 4,312
- Location
- Island of Misfit Toys
Whoa! Seriously???
Wouldn't it be a tad easier, a little more stock looking, and probably less destructive to have and use the correct interior door panel clips? (the ones that slide into the preset notches on the paperboard side of the door panel and pop into the holes on the metal door frame) Go to Year One, R/T Specialties, Paddock or where ever, spend the 10-20 bucks.
Last edited:
pushrod
Well-Known Member
Nothing takes the place of necessity. The cardboard is lapped by the vinyl after instalation and now the damn things will not come loose !
gearheadbill
Well-Known Member
door panels
Seems like we may be talking about 2 different things?
the panels should have clips that fasten in the door frame[ there is a upper channel with the window felts that lays up by the window that channel is fastened to the door panel originally by staples!
Bill
Seems like we may be talking about 2 different things?
the panels should have clips that fasten in the door frame[ there is a upper channel with the window felts that lays up by the window that channel is fastened to the door panel originally by staples!
Bill
MoparEd
Well-Known Member
Yes. I'm talking about the staples that go into the steel frames. My orginal panels where painted and shoot. So I order news at the Nats. They told me that there would instructions on how to install. Yeah there was for the DOOR CLIPS, I can figure that one out.
69 Runner
ADMIN wif a corner office (Deceased - RIP)
:worthless_thread:
MoparEd
Well-Known Member
O.K
Similar threads
