Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
HI,
Need more tire speed for out of the hole a little less traction on take off. maybe a little smaller tire or a little lower rear gear, and in this video sounds like your shifting way to soon motor not revved up..What RPM's are you shifting at? should be like 6T. Should be power shifting...
HI Al
another stupid question.. I have a mostly stock 318 LA... except for a slight cam up grade to a .440 IN, EX..freshened up Stock 3 speed auto. car is my 75 Fury, 2 door hard top (I think, no window post). true duels out the back. I did clean up and gasket match the exhaust side of the...
HI, Just wondering why such a small lift cam suggestion? Million show stock replacement of .421 IN .443 EX.. RPM intake, carb QFT 450 will get a bigger carb
thanks take care be safe
tim
HI,
Getting tired of being whoop on by the 4 bangers and wanting a little more attitude.
What I have is 75 Fury, 318 LA. 30,000 miles on stock bottom end rebuild, True duels exhaust, stock heads. I have a lifter starting to leak down causing an occasional tick, so I'm going to change it out this...
HI,
I saw a post a while back about timing by vacuum.. so I thought I'd try it today..I was running 17 HG of vacuum. Using a vacuum gauge I turned it up to max i could receive and it moved up to 18 Hg. max . Well it runs better starts better .. Not really sure it I got anymore power out of it...
HI all,
I have a 75 fury with 318.
Looking to have the heads reworked with bigger valves,
Bigger cam ( I have a .440 IN,EX. in it now) but want to go better or bigger.
Carb is a 450 cfm QFT. Holly, well go bigger if have/need to..
Tires are P225 X 70 14"
I'm thinking it has the 2.73 Rato...
Hi,
That won't work the clutch fan works off of the HEAT from the radiator to heat the spring in the clutch to make it grab and spin.
good luck take care be safe
tim
HI,
A google search for fan shrouds for 68 came up with this explanation
Early 1968 big blocks used a metal fan shroud similar to the one used on small blocks with an Aluminum radiator. This lasted until approximately vin 2500, after that it was switched to a fiberglass fan shroud to help cure...
HI,
In the picture of your carb I see a tube plugged on the passanger side? Could that be the bowl vent, as I don't see a vent over the bowl.. if that's the bowl vent it might be stopping fuel draw flow at speed? Just my .02
Good luck take care be safe
tim
HI,
What I am going to do is run what I can get (afford) and just increases the front end heights if I have ground clearance issue , easy enough with the torsion bars.
thanks to all that replied
good luck take care and be safe
tim
HI,
OKay thinks... now my car does sit purity high, taller tires and raised front end (torsion bar raised).. can someone give me the distance from the cross member to the bottom of the header and I can measure and see what I have for ground clearance..
Thanks take care be safe
tim
That's what I'm finding.. they list them and when I search application its no fit.. Summit , Hooker Doug's.
Now with that said.. the muffler shop said they can get some Patriot's but they want $1000. to install Jeeezzz I already have new exhaust all the way to the stock manifolds. Way to much...
HI I've look all over and it seams no one produces headers for my 1975 Fury with a LA 318.. do any of you have any links or where abouts to find a set??
Thanks take care be safe
tim