Search results for query: *

Since it won't start and run I cnnot tell you. All I know is I changed the ICM and it runs.

I installed a new electronic distributor and ICM from Amazon. Ran great for about 200 miles. Started,ran 15-30 seconds,shut down wouldn't start. Ordered a new ICM from Rock Auto,installed and fired right up.

PM sent

Thank you for this. I think they are not reproduced aftetmarket. I can buy a filler tube for a 68

Now that I see how that extension fits I looking for a pic of the upper fuel filler pipe from the fuel door to the rubber elbow. I am converting from a fuel cell back to a fuel tank

I thought I'd try it are here is what I observe. The probe is in the lower part of the rad by the outket port. When I first start driving temp goes to 200 then back below 180 then back up to 190 and pretty much stays there. It was 30 degrees here the other day and I idled for sbout 10 minutes...

Car not here right now. Pic coming

I want to use a straight stick on my comp plus shifter in my 67 Coronet. It now has no console but I intend to install one and would like to reuse my stick. I'm wondering if any one has done this with success and how they did it. I'm thinking perhaps a 4" spacer between the shifter and the...

Yes,my electric fan temp sensor is in there. I jusy want to use it for my temp gauge

I'd like to move my fan temp sensor from the water pump so I can intall a mechanical temp gauge. I'm thinking a temp probe in the rad fins might work. Any comments?

Good to know. Thanx

Yes,I was given 2 265's with the car but my 245's just fit.

Just bought the car and I like the cragars

I need to change my tires on my 67 coronet 500 with a 440 and a 4 speed. It currently has 14x7 front cragers and 14x8 rears. I'm thinking I'd like to go with a narrow 14" front tire,like a 195 but stick with my 235s on the rears Any comments?

1967 Coronet clock delete. $25 Cdn.

5 With your help I searched using your part number and it came up. Apparently I was searching 67 coronet instead of 67 coronet 500

Sure does,no idea y it doesn't come up on their website. I will call them. Thanx for this.

I went to their website and searched coronet vinyl top and they only show trunk matts

Looking to buy vinyl top material for my 67 coronet. Where is the best place to buy it?

Problem solved. I bumped the timing back a notch and adjusted the air screws and after 2 pumps it starts and keeps running. Thanx for all your advice