Search results for query: *

Hi All, I'm wondering if anyone knows where to get some good quality gaskets for the key locks on the exterior for the doors and trunk? The ones I have from YearOne or Classic Industries (?) are slightly too big and don't fit well at all. The driver's door one actually fell out. The color of...

One final question for anyone that have some answers here. The attached heat shield is for the drivers side and wanting to make sure it's a natural finish as shown or is it painted with some heat resistant paint? Any help here would be great. Thanks, Wayne

Another question I'm having trouble finding info on? The attached picture is for a 1970 Superbird and I'm trying to figure out what fills this opening? I'm thinking it's one of the rubberized flaps used inside the fender wells with the stainless steel spring clips but would like to be sure...

Hi Everyone, This is for a 1970 Superbird so needs the extra nipple for the vacuum headlights. I'm hoping you'll be able to help me here once again. I'm looking in the David Wise restoration book and not finding complete info on the vacuum connector for the brake booster. I'm just doing...

Hi all, This forum has been awesome in helping on this project. I greatly appreciate all the help! One question that I'm hoping someone has the answer for here. I'm looking to install the shoulder belts in my car. I have the belts and everything needed but what I thought was simple has me...

Hello, Need some help here. Doing the final details on the restoration of my car and have (2) Window stops (assuming this is what they are) that I'm not sure if they go on the door window or the rear quarter window and precisely where (see attached photos)? I'm at the tail end of a 4+ year...

Hi All, Wondering if anyone knows a source for heat shields (up at the exhaust manifolds) for the 440 high performance exhaust manifolds? It's getting really hot in the engine compartment, melting some plastic clips on the fender wells, this is running at 180 degrees. Especially on the...

Hi everyone, OK, here's one that has me baffled. I have a 1970 Roadrunner and finishing off a restoration on the car. It's an original power steering car but was drag raced briefly back in the day and was switched to manual steering. I am now switching it back to a power steering car. I...

Hi everyone, Wondering if anyone knows a source for video on how to install and assemble the windows and wind wing in the doors. I'm sure I can figure it out, but would save a lot of time to have some guidance. If no video some good instructions would be the next best thing. Appreciate any...

Hi Does anyone know a source for this? I'm not seeing anything at Year One and Classic Industries nothing definitive. Any help here is appreciated. Thanks, Wayne

Hello, Wondering if anyone knows where to buy the brake swivel by itself that hooks the power brake booster/Master Cylinder to the brake pedal? They have it at Classic Industries but you have to buy the plate that mounts on the firewall as well, which I don't need and makes it much more...

Hi, I'm getting close to finishing my restoration project and needing new bearings (if available) for the Brake and clutch pedal. It is what the pedals pivot on when put on the rod up under the dash. They are not available from Classic or Year One. Any help is greatly appreciated . See...