Search results for query: *

Is anyone running twin Holley 4235 and 4236 770cfm secondary carbs on their 426? If so do you care to share your jetting please Stock crate motor with the marine manifold

Does anyone have the part # so i can look for one down under. Shipping overseas is ridiculous

Does anyone know with caps?

I've got a RR with a 440 stroker that was purchased from a deceased estate without paperwork for the engine build. I've had a few 440s and this is definitely stroked. Is there a way to determine the displacement with the engine in the car through the spark plug.

Has anyone used these with the nylon spacers?

My heat riser is leaking from the pin that holds the flapper. If i remove the whole heat riser assembly and plug the holes for the pin and keep the heat tubes attached, would this be ok?

I got these gears a while ago, the ring is 43 teeth and the pinion is 15 which makes it in my book 2.86 My understanding is the lowest is 3.54, which i have one off Is this a truck ratio or something

I have a 451BB 10.5CR edelbrock heads 550 lift hyd roller street driven and don't know what spark plugs to use Thx

Hi can you tell me what you guys use to grind the ali when you gasket match and port ali manifolds and heads. Any links to sellers would be appreciated. Thx for looking

Would 2 1/2in exhaust pipe be big enough [I already have mufflers] Or would i be better off going with 3in thx

hi i have a 383 cast iron waterpump. Today the round front part with the impellor crapped itself. I have the choice of getting a complete alloy wp or a complete iron one both for the same price. Since nothing is wrong with the iron housing i will leave it in place and just replace the front...

Does the alternater pulley have 1 or 2 grooves. It's for a 70 sport satellite but i can't tell cause i don't have access to it and i want to buy a high output alternater thx

Wanting to go from 318/904 to 440/727. Apart from changing k frame and driveshaft will the 904 trans crossmember work with the BB/727. This is for a 70 plymouth sport satellite. I'm pretty sure the 318/727 crossmember works with the 360/727 thx

Hi got a few questions that hopefully i can get answered. I have a70 sport satellite 318/904 that i want to swap out for my 408 SB/727. Do I need a different trans cross member. I am going to put a 8.75 axle in as well. I am having difficulty finding suppliers for the rear uni crosses, can...

What would fit using a 650 speed demon on a performer rpm, would the stock work also the lokars look good any particular one thx