Search results for query: *

I have a 66 Charger that had a disc brake conversion before I bought it. I like the original wheels and hubcaps, but the conversion has me stuck with 15" wheels. When I had my first charger in 1970's my wife to be had a 72 Charger with front disc brakes. I used to swap the wheels back and forth...

Thank You. I'll get the car later this week and check it out. Thanks again.

Thanks, but that doesn't really answer my question. My dipstick has a bolt attached to the end, welded or something. I have always filled the fluid to the fill line but get fluid leaking on the ground. It has occurred to me that maybe it is the wrong length dip stick and maybe i am over filling...

How long should the transmission dip stick be for a 66 dodge charger automatic with 318?

Went out and played around with the alignment a little, pulled it toward the outside as much as possible and it seems to be working fine. Closes smooth and solid sounding. Maybe I just lucked out. Gonna try it for a week or so without door card on and see how all goes. Thanks for all the help...

Been having a problem with my driver's door for some time. Several times it has closed and then refuses to open, I can finally open it by kicking it but don't want to break the door card. My question is how do you line up the catch on the b post to the lock mechanism on the door. I can't figure...

Does anyone have a source for the nylon nut that goes on the washer pump for the windshield washers. My pump bought years ago at car show did not come with one. Auto parts stores selling the pumps sell them minus the nut, (Oreilley's Advance Auto, Amazon). Hardware stores, Industrial supply...

Yit has two. Finally found it hiding in some other wires. Must have come off when I took it out. Thanks Ted

Does the headlight hold open switch have two wires or does it ground thru the dashboard?

440 4 Speed and Rem Charger. Test fit looks good. I was thinking some silicone sealer to keep elments out. Thanks Ted

That's where I got it. Will try what you suggest. Thanks Ted

I bought a new trunk emblem (metal and plastic parts), purchased the gaskets year ago or so, and now want to install the emblem. How do the gaskets go. There are four circular gaskets and when I try to fit them in it seems the whole emblem is raised above trunk lid. Can't seem to find any...

These are from the best angle I could get. 52 is off of the center box to the drivers side. I ran it over the vent line and over the steering column, as seen in 53. I then ran it thru the hole in the brace as seen in 54. I attached it to the top of the connector box I bought from Vintage air. I...

Will try tomorrow

Arch, Here are a couple I just took.

Arch, Here are photos I took the other day If you need closer or more detail let me know.

Yes

Forgot about the pictures until I ran across this post again. Here are some. If you need any specific pictures let me know

Arch, I was out of town and only just saw this post. Will be glad to send pictures of anything you want. Just let me know. Ted