• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. H

    Thoughts on Snow performance water injection

    Where I live in Northern BC it is increasingly difficult to find good high octane fuel. So I am considering putting a Snow Performance water/methanol injection kit on my 65 Coronet. It is 10.5.1 compression and I sometimes get some detonation. The timing is turned back and the mileage and...
  2. H

    440 oil pressure

    In my 65 Coronet I have a 68 440HP motor. Bored 40 over, stock crank, iron heads, cammed, eddy performer manifold, headers and 3 inch exhaust. I purchased the motor mount kit from Schumacker as i did not like the way the previous owner had shoehorned the engine into the car. I purchased the...
  3. H

    Lowering compression ratio

    I live in the Northen part of BC Canada. I have to drive my car a long ways to get to any meets, shows or gatherings. My car is a 65 Coronet with a 68 HP 440 Engine. The compression is the stock 10:1. Car should run on 94 plus octane. 91 is around here a little bit, but 94 is hard to find...
  4. H

    Sure grip advice

    So on the weekend we were running our 68 Moncaco demo car and I am in the pits talking to other drivers and there is a guy who is running this 1970 chrysler something or other, I ask him if he knows of any Sure grip diffs as he has alot of mopars. He says sure and hands me one out of the back of...
  5. H

    Valve springs?

    My 68 HP 440 has what I believe to be new stock springs, w damper springs in it. It appears to have also had a valve job ( I say appears because I do not know what work was done to it before I bought it but it appears to have been all rebuilt) My question is: I am putting a comp cam thumper...
  6. H

    Torque Converter ID

    The torque converter behind my 68 440 looks brand new. Only numbers on it are a large HD and then the numbers 5298. Any idea what it is? what the stall might be? Would like to use it if possible, just want to know what it is so I can decide if the cam will work with it. cheers Steve
  7. H

    Camshaft question

    My 65 Coronet came with a rebuilt 440 engine. It is a 68HP engine. It has been bored 30 over, has a balanced steel crank, new pistons etc. I took it apart to paint it and check it over as I wanted to make sure it was rebuilt as the seller was not 100 percent certain, it was just what he was...
Back
Top