Search results for query: *

Yes. Mike

4 speakers is enough for a stereo system, I am assuming 8 track players were stereo output? Does the radio have enough output wattage to carry that many speakers? Mike

I hit a turkey with my company truck and broke the plastic grill. I was passing a slower vehicle when it happened and had no room to maneuver. All I could see in my mirrors was feathers! Mike

My vote is black. Looks BADDER! Mike

News to me, the swap leaves very little tunnel room and necessitates transmission mount relocation and drive shaft shortening. Not that I didn't mount my engine as far back as I could! Mike

TTI fit is no better. Look at my system and I already bent the left side towards the cross member cut out. Mike

Why would you want a screen? Are you using a air filter? Mike

What is your time estimate-2 weeks maybe? Mike

A couple of years ago I filled out a lot of rust pits on a pair of Ford 9' axle shafts, right where the seal contacts. I used JB Weld original formula and sanded them with a piece of emery cloth. No leaks have occurred to date. Mike

I generally use Standard brand kits and unless pressed for time, I purchase them from Rock Auto. Mike

Do you have the FSM for the car? it will tell you what you ask. Mike

Totally custom :). Mike

Looks much better. Mine: Mike

That control setup would look better if you placed a rounded end plate under the VA control to cover the original opening. Mike

Is it just me or is this thread getting a little "testy"? Mike

Turbo. Mike

I think your plan is sound but, 2" for the cross over is large enough. Mike

I did lots of tuneups 40-50 years ago. It was a good income task that was needed every 12,000 or so miles, as was repacking wheel bearings. I worked next to silver-tongued mechanic that had his customers coming in fairly often for u-joint repacks! Mike

Yes, that switch does not belong in a 65 Belvedere, at least with a variable speed motor. I purchased a NOS from a vendor-don't recall which one though. Mike

Perhaps a cut and reweld on that spindle. Probably complete disassembly of regulator will be required. If, in fact it is a 67 model. Mike