Search results for query: *

I use blue loctite because that red is a real bugger to remove!

Are you assuming he’s using a vacuum advance style distributor using manifold vacuum or ported?

I have a Glasstek fiberglass trunk lid on this car. I need another deck lid and was thinking of that AMD unit. Everything will require some amount of work for excellent fit.

That molasses is an amazing rust remover

Same rear gear as mine. Same GVOD. I run the 275/60-15 as I think the additional sidewall height is an advantage on the track. I’m on an 8” wheel but a 10” wide would be ideal.

This doesn’t need that much tire nor would those fit without significant mods. The 315 is a 30” tire and the 275 is a shorter 28” which, in this case, will work better with the gear in this car.

Reviving this old thread in hopes that someone can post a picture of, and tell me the size of the screw that holds the amber lens in the front side marker light housing for the 70 Coronet. I solved the retainer issue by making my own but I still need the screw info. Thanks!

I have that tire on mine now. Same R2 compound as the SS. Same 60’ time.

It’s a street car and with good to medium prep, you could put it on a radial and drive to the track. I ran a 1.30 60’ 5.50 1/8 mile at 4000# on the ET Street SS MT-3453 tire. After running radials at 160mph, I’ll never go back to a floppy tire.

I have done some house renovations in the past, cutting the roof off a 1-1/2 story making it into a full two story, built my shop in the backyard, and remodeled my kitchen, but I hardly have time for anything besides the cars these days. N scale narrow gauge trains and miniature machining are...

I finally found the box these were in

Thanks for the kind words. It’s been a really long build, spanning over a decade, but it’s been a great learning experience. Thank you (and everyone else who’s still here) for following along.

I’m going to bead roll an offset on the end of the first panel, install nutserts in it, and the second panel will overlap it and screw to it.

Finished the mounting end of it. The wiring and linkage will have to wait.

I think it’s a POPOMAN Green laser thingeee

Looks great. Following along.

In between all of the family gatherings and snow shoveling, I managed to get a wiper motor adapter plate made. Maybe I’ll manage to get it painted and on for good yet this week.

Got the first half of everything welded in and made the sheet metal piece. I still need to trim it and put the screw holes in it.

Borrowed it from a buddy of mine.

Lol, you could have driven the Roadrunner last weekend