• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. pedal2themetal

    factory manifolds, bolts that hold the down pipe??

    HI, I'd would use shorties. Would these work?? I do have lots of room in the center of the motor on both sides for the dumps...
  2. pedal2themetal

    factory manifolds, bolts that hold the down pipe??

    HI, Just checked Summit , only have 1 type $939.oo
  3. pedal2themetal

    factory manifolds, bolts that hold the down pipe??

    HI, yeah I've thought about headers , but they make so much under hood heat, can't afford ceramic coating .. there's not much in an affordable range for budget builds.. I could wrap them i guess.. even cheap ones are like 700$$ + install you have to remove tie rod I think to run it thru headers...
  4. pedal2themetal

    factory manifolds, bolts that hold the down pipe??

    HI, Working from the ground with Jack stands can't get the right angle to get both hands up there.. might be different if it had a lift. but I'm front/back yard on my own stuff..
  5. pedal2themetal

    factory manifolds, bolts that hold the down pipe??

    I like that idea only maybe I'll use bolts from the top with the JB weld to hold them in .. and can use nuts from the bottom....
  6. pedal2themetal

    factory manifolds, bolts that hold the down pipe??

    HI, On my 75 its hard to get to the top of the bolts that hold the down pipe on.. is there a way to attach studs or something to hold them while you attach the down pipe to bolt it up?? welding taping for studs??? what do you folks do??
  7. pedal2themetal

    Long tube headers for a 75 Fury with 318

    HI, What I am going to do is run what I can get (afford) and just increases the front end heights if I have ground clearance issue , easy enough with the torsion bars. thanks to all that replied good luck take care and be safe tim
  8. pedal2themetal

    Long tube headers for a 75 Fury with 318

    HI, Can't you just raise the torsion bars a little and raise the front end to stop them from dragging? good luck take care be safe tim
  9. pedal2themetal

    Long tube headers for a 75 Fury with 318

    HI, OKay thinks... now my car does sit purity high, taller tires and raised front end (torsion bar raised).. can someone give me the distance from the cross member to the bottom of the header and I can measure and see what I have for ground clearance.. Thanks take care be safe tim
  10. pedal2themetal

    Long tube headers for a 75 Fury with 318

    That's what I'm finding.. they list them and when I search application its no fit.. Summit , Hooker Doug's. Now with that said.. the muffler shop said they can get some Patriot's but they want $1000. to install Jeeezzz I already have new exhaust all the way to the stock manifolds. Way to much...
  11. pedal2themetal

    Long tube headers for a 75 Fury with 318

    HI I've look all over and it seams no one produces headers for my 1975 Fury with a LA 318.. do any of you have any links or where abouts to find a set?? Thanks take care be safe tim
  12. pedal2themetal

    Headers for a B Body with 5.2

    Hi I guess the Jegs wont fit as I have Power steering,, does the hookers work?? it says Ok with steering but it doesn't say power steering? or is that implied ? thanks tim
  13. pedal2themetal

    Headers for a B Body with 5.2

    Hi, thanks all.. does the driver side come in two pieces ? How do you get it around the steering linkage? OH is the Charger the same body style and under hood steering set up?? tim
  14. pedal2themetal

    Headers for a B Body with 5.2

    Thanks Rumblefish, I just looked up Summit and they don't have the Summit brand but have the Hooker brand at $224. #7805 HKR. Is this one of the brands you were talking about that work/fit? Link here https://www.summitracing.com/parts/hok-7805hkr does somebody sell shorty headers for this...
  15. pedal2themetal

    Headers for a B Body with 5.2

    Hi I can't seam to find headers for a 75 Fury with the 5.2 Motor. Is anything available for this application? thanks tim
Back
Top