Search results for query: 66 trunk panel

Thank you all for the greetings, here is a little backstory on my B Body. I bought my '67 from a father / son duo that drug it from a garage in 2019 where it had sat since late 80's early 90's. Well, 2019 happened as it did and they sat on the car for 2 yrs doing nothing to it, to which I...

For sale 1968 plymouth Roadrunner 4 speed, 400/470 stroker, subframe connectors, front disk brakes, msd electric ignition, mcleod clutch. Needs front floor and trunk pan, left quarter panel needs painting, and carpet. Asking 22k located in Atlanta,GA also consider partial trade. Looking for a 66...

Had a 70 Challenger with a 'pimple' in the roof to quarter panel seam. I was a non vinyl top car so it got lead there instead of filler. Both seams were easily detectable but the on the passenger side had that 5/8" pimple and was done that way at the factory. My 70 Challenger mentioned above...

I replaced my trunk lid with another one and after it was painted I was going to mount the Satellite badge that sits above the trunk panel and realized the trunk lid didn't have holes for the badge. I'm hoping someone with a 66 Satellite can measure the placement of the badge. How far from the...

Please pull the photos from your link and post them here. Thanks

Offered is a trunk tail panel for a 66 Satellite. In really good driver condition. A factory red insert tail panel. Has usual aluminum ghosting which can be cleaned up. Otherwise in great condition. Asking $35 and you pay the $25 shipping costs. Prefer payment by Paypal, thanks Contact me...

At some point and a big kicker to restoring this car to running condition was locating an interior along with the rear window that as many know they just weren’t that common to find. I was fortunate or maybe it was just persistence that paid off for me as I found an ad in Hemmings if I remember...

Maybe a short in the wiring at the driver side kick panel? Not sure about your year car but on the 66-70 the brake lights ran through the kick panel along the wire shield under the rear seat and into the trunk.

A few years ago, I was asked to authenticate a 1966 Belvedere II purchased locally with a Hemi, 4-speed in it. After looking it over, I was able to tell the new owners that it was indeed a real deal 426 Hemi 4-speed car. This Belvedere II was built in December 1965, and as such, had the HP2...

I’m not sure what the heck some previous owner did with my 66 Satellite but I had about a half dozen of those 1” holes in the bottom of the frame rails apparently used for trailer tie downs that were distorted - some pretty severely - both front and rear. At first I thought maybe it was damage...

I am selling my 66 trunk finsh panel for GTX or Satalite for 125.00. Thanks for looking....

1966 was the highest production year for Street Hemi cars. The ad is misleading to say 21 Hemi '66s built...perhaps '66 Coronet 500 Hemi convertibles! That VIN tag is not a repop. I've owned over two dozen '66 Coronets and twelve '66 Belvedere/Satellites, plus a few '67s over a 40-year-period...

Beside the obvious, tape off and paint, does anyone know a better way to paint the letters on the trunk trim panel? I've de-anodized and polished the trim and now have to lay down the argent. Then paint the letters black. I can't imagine how the factory painted these letters. Has anyone done...

Hello. I recently picked up a 66 Coronet 500 convertible and I need a few things for it. Below is a list of parts I need: *wheel well moldings. I believe 67 R/T is the same. *trunk lid horizontal trim pieces. The ones that go on the top and bottom of the trunk panel. *Complete set of seat...

With all of the questions regarding ACC carpet availability, pricing and such, I am offering the following pricing for members to the site. This carpet is drop shipped directly from ACC within 48 hours of the order being placed. Shipping is the actual discounted UPS rate that they charge me...

Project. All parts are accounted for, bagged, and labeled. All metal work is done, she is back solid. The only repop metal in the car is an amd floor pan and trunk extensions(unsure of brand), everything else is original metal cut from donor cars. Needs final stitch weld on the quarters(was...

Good luck with purchase. You might want to look right above the driver's rear wheel. Looks a little soft there or it may be poor lighting/camera. There have been a couple threads on what to look for body wise on these. Basically- Above and around the rear wheels (all of those compound lines...

I have an all Citron Gold 66 Charger. The interior has multiple shades of green. Does anyone know of a resource that sells the dark green trunk panel paint (plastic cover for tail lights and cardboard inserts) --- or, the light green side panels in the rear (the trim that surrounds the headliner...

For those who will be attending the upcoming Carlisle and The Nats show in August, we will be bringing a limited amount of carpet and trunk mats to these shows. Please call or email by Monday afternoon, June 29th to confirm your request. This will be freshly cut and molded sets that will make...

Trunk lid for sale fits 66 Satellite or Belvedere. No rust will need some body work where the finish panel is mounted as seen on pictures. $75.00 Local pickup only, no shipping. Located in SoCal, 40 miles east of Los Angeles