Search results for query: *

Thanks. Turns out it was off my accelerator pedal cable. Tried getting it back on but I guess the spring done sprung so I put a e-clip on it.

emergency brake cable grommet for firewall

I read it as a lark!

@dadsbee What's the story on the chop top Ramcharger??

This one is hilarious

The reservoir can must be close to perfect for the o-ring to seal.

Whatever is being changed/updated is affecting the photo orientation too. Many of mine are being loaded 90* off their orientation. If I go to "insert image" its correctly orientated but I can't load any more on to my thread.

The starters alignment is the snout into the bellhousing. That top hole, too large, larger than the bottom bolt hole, is just there to help hold it in place. Seems like you may have a wrong starter.

I'm 66 now even with a lighter lenses, I'm also blue eyed/blonde haired (supposed to be more sensitive to the light) really not good for your eyes even then; I can't see **** NOW without cheaters, & a crapload of backlight have to wear a leather shield over the back of my helmet, keep the light...

Hot Rod Black is a very good looking suede. Did the dash and steering column.

Since there's been a discussion on shock length when in droop, I had a look at the lh arm on the Challenger to see how far away it was before hitting the bumper as thats part of the equation. I found that the arm, on the rear tube, was hitting the rail. So...out came the airsaw. I trimmed away...

RIP Bob You always brought a bunch of passion to your comments, backed up by your data. Those comments will guide fellow members well into the future if they desire to follow them. Condolences to his family.

Could try here. Page 45. https://www.rogergibsonautorestoration.com/wp-content/uploads/2024/01/Catalog-2024.pdf

Not really...the only thing laughable about this thread were your expectations. :)

Ok I hooked the ignition switch back up like you described but I noticed that there is no violet color wire to hook up to the ground originally when I took the silicone off from around switch, the ground wire was not hooked up. I searched the wiring harness where the ignition wires come out of...

I've used the Summit Racing brand mini on many big block and have no problems with them. I don't use the stud either, but 2 bolts easily. I'm thinking also it can't be the correct starter if it doesn't engage. Might be a faulty starter though. I had one from the get go that didn't engage...

RIP Bob. You were one of the best commenters on here. You'll definitely be missed.

Phantasm Hemicuda.

I bought a mini starter from NAPA. I had to remove an outside cover to get the starter, there was another pair of studs underneath as I remember.

$300 plus shipping