Search results for query: *

We need a law making AI admit that it is AI when asked. There was a lot more to the ai detector page I used, most certainly written by AI. Rat bastard turning in its own kind.

I have 2 cars with manual rack and pinion. Haven't driven the Hemi Road Runner yet. I personally like the rack and pinion. You can go power rack and pinion. I have Gerst tubular, now QA 1 owns it, and has modified it to make most of it their own so no cross over between who's is who's...

Nice! Lucky You... I haven't been there in years.... I believe the last time was 2014... Cruised over on the Norwegian Jem as I recall. Gratuitous shot of my bride in St Maarten

Model year 1968.5 is the point for federally mandated shoulder belts. IIRC they had separate buckles until 1971, then a funky slip disk, like a CB radio mic clip, then were integrated into the retractor in 1974.

I would imagine you are referring to the fronts? Yes, they are cheap bearings. I removed the cups from my new rotors, couldn't on the 10.95's as there were no backside access grooves to knock the cups out, then bought new SET 2 and SET 17 Timken bearings from Amazon. Sometimes Rockauto has them...

BTW- this morning, a co-worker (who has a PH.D BTW, not that it matters) was complaining about the current "cloudfare" outage that affects chatGPT, as she had been using it to write her documentation.... She happened to mention that her dishwasher was "leaking", and that of course, when the...

Just your opinion, of course… :rofl:

thank you new to this

Yes.

Both Ford and Chrysler bought the wings from the same manufacturer. But all Mopar Go-Wings had 36" pedestal spacing, while Ford (and Mercury) varied between 31, 33 and 36" depending on the car attached. Ford also used it longer, up to the 1973 model year on the Mustang. And that Mustang did...

I only take my car to shows that benefit the military , local FD or local PD. Not that my car would win but I leave before the judging.

There is a float available that has a recess in it, to clear the Holley main jets. No, I don't think that you can use that steel plate that the stock metering plate uses. The Promax plates seal against the bowl gasket. Do you also have the Promax base plates? Did you deal with the...

I cut access ports on the K to get at the backside of the tubes. Couldn't weld all around, but did pretty decent. Had to do some scrubbing to get the rust away before hitting the tubes with the gun. No reinforcements on the backside other than weld. Outside, yes. On my wagon and the Challenger...

Completely missed the tells I gave and is concentrating on details that, to the AI "judge of AI" are realistic, despite being in an overall area that is perhaps the most unrealistic portion of the image.

It happens all the time. Many people don't appreciate originality.

Still monies to be spent. Feel free to bring your charitable donations over! Lol

My 70 Swinger has them. They attach to the shoulder harnesses.

Hmmm like Christine?

Happy Birthday!

Happy Birthday! Watch your feet!