Search results for query: *

So from what I have seen online the Ford TKX input shaft length to the face of the case is 7.21", A833 is 8.625", is this what you have also found? If so wont the TKX end up too far outboard?

Believe steel flange just bolts up and motor couldn’t you just use o rings?

This is sad news. RIP Bob, you will be missed.

Yes it’s an old 833 bell housing.

Wow that's pretty neat. Look how thick the deck is between spark plugs. Also strange they used open chambers.

This past week, we finally were able to get this cat to a vet, so they could look at his visibly mangled left arm. The cat we call "Skippy" has been hanging around out front for about three months. We have been feeding him since then but could not get within 15 feet at first. Slowly, we moved...

As noted, the double belts are normal for a 1970 Charger, and other 1970 B-bodies. Actually, for a bench seat or bucket seats with center seat/arm rest, there are three. One is for the shoulder belt, and if the shoulder belt is missing, it has been removed. A 1970 car would have the shoulder...

How about a picture of both sides?

Yeah, salt and water can hide anywhere, undercoating or not. It's also somewhat of a sound deadener. Doubt most of us would drive our cars in that today! I don't even go out in the rain. You could just do the fenderwells if you didn't want to do the whole car.

You have a qa1 kit you’re wanting to sell?

andrewwoz....you have a PM!

Hi, these are the measurements: I need 12 of them. Thank you,

Thank God we saw it in the raw in '89 !

We need a law making AI admit that it is AI when asked. There was a lot more to the ai detector page I used, most certainly written by AI. Rat bastard turning in its own kind.

I have 2 cars with manual rack and pinion. Haven't driven the Hemi Road Runner yet. I personally like the rack and pinion. You can go power rack and pinion. I have Gerst tubular, now QA 1 owns it, and has modified it to make most of it their own so no cross over between who's is who's...

Nice! Lucky You... I haven't been there in years.... I believe the last time was 2014... Cruised over on the Norwegian Jem as I recall. Gratuitous shot of my bride in St Maarten

Model year 1968.5 is the point for federally mandated shoulder belts. IIRC they had separate buckles until 1971, then a funky slip disk, like a CB radio mic clip, then were integrated into the retractor in 1974.

I would imagine you are referring to the fronts? Yes, they are cheap bearings. I removed the cups from my new rotors, couldn't on the 10.95's as there were no backside access grooves to knock the cups out, then bought new SET 2 and SET 17 Timken bearings from Amazon. Sometimes Rockauto has them...

BTW- this morning, a co-worker (who has a PH.D BTW, not that it matters) was complaining about the current "cloudfare" outage that affects chatGPT, as she had been using it to write her documentation.... She happened to mention that her dishwasher was "leaking", and that of course, when the...

Just your opinion, of course… :rofl: