Search results for query: Tire sizes

...2015. Still, there are lots of threads here on tires and wheels. Just be aware the 66/67 B bodies (other than the chargers) have the smallest wheelwells of any. Just assume that you will be best off with a conservative choice of wheel and tire sizes. MT Mopar hasn't been here for almost two...

Back are 335-25-20, front 275-40-19,

So... I know I'm beating a dead horse here. Reading through many posts about tire sizes on cars. I understand everyone should take their own measurements, so i did. I'm going cross eyed trying to sort out what Back spacing & max tire I can squeeze in that would be optimal on the REAR only at...

Men and tires... can someone explain what happened with men's mind? Is it the muscular alter ego... or just the creation of an imaginary conditioned idealized self or a kind of mass psychoses or mass formation? Or do the 'musle men' share a 'big tire size'-gene for maximum wheel well...

I am interested in your wheel/tire set up with the 14", mag wheels, I assume. I understand that you have had 14"? Which tires and sizes ? Can you post some pictures with the 14" mag wheels on?

Those tire sizes will work, but ONLY on the right backspace. The original torque thrust usually didn't have enough, putting the tires out too far toward the fenders.

Great info, thanks Kern Dog. I have a set of 1.12" bars on the shelf, I may slip them in on the initial assembly. The 1-3/8"front bar I have already installed is solid, but I also have a hollow Hotchkis 1-3/8 that goes with the 1.12 bars for another project. So with the solid bar, I should be...

Looking to run a 295/50/r15 on the rear. For a 15x10 would 5 or 5.5” BS likely fit best? I’d prefer the tire not touch the lip of the fender or rub. What do most people like up front? 15x7? 15x6? What sort of backspacing? I’m looking into the Summit Quick 8 rims for something cheap and half...

Looks good. What are the actual tire sizes though? 20x335 doesn't tell the aspect ratio. Normally, tire sizes are listed as width, aspect ratio and rim diameter.....335-35-20.

I have them on my ERA 427 Cobra and they have been a great tire. They are pretty highly regarded in the Cobra replica group as a good substitute for the crazy expensive Avons. Not to say they are in the same performance rank as the Avons but a better than average riding and handling tire that...

I just want a good handling and safe tire that will fill in the well a little bit. The 14s with the tires that are on there seem lost in those wells. So nothing to big nor major, just a little more fill. I got these rims because it’s the style I like and they were 15s, which I felt was what i...

kick a$$ ...

I have a '67 Coronet R/T that I'd like to up grade the wheels and tire sizes. It currently have the 14" steels with dog dishes. I'd like to go old school with a set of Cragar SS wheels like the days of Dick Landy and his '67 Super Stock Dodge Coronet. Was thinking 7" in the front and an 8" in...

Those are what I run on my car trailer

...really refers to. For me at this stage of the build that is a major focus. As you can see, at this point the car barely even exists. So tire sizes, gearing etc. needs at this point to be forecast to something reasonably close. So yes, I have little money for experimentation. As it stands I'll...

The 66's and 67's are a different animal from the 68-up b-bodies. On a 66-67 you can fit a 275-60-15 with a 7" or 8" rim with the right back spacing but you will almost certainly get a rub on the driver side tire when turning left (or if you have passengers in the back seat). A 7" rim needs 4.5"...

Have really searched before posting. My car has the awesome looking BFG 295/50 & 245/60 combo. I think only thing that would look better would be radials that look like bias ply in the same sizes... so about a G60 in the front, and a N50 in the rear(correct me if I'm wrong about the...

Walmart sells 14” & 15” car tires in a lot of sizes. The cost can’t be much more than a trailer tire so I’d go that route. Safe travels.

If clocked wrong, it won't necessarily strip. I do agree the Mopar chart will be real close. Since the FSM gives tire sizes from "70 not diameter, I'm guessing at what size is a 26" diameter. But 30 or 31 should be correct.

You may try your fly-by-night local tire outlets as they pick up discontuned brands and tire sizes. Some of their tires will be brands or names no one has ever heard of. The one thing in your favor is all tires must adhere to DOT specifications if sold in the US. Beware of how long these tires...