Search results for query: *

Also don't forget a line can be loose enough to suck air into the system and not leak fuel.

Just checked, their site says up to 74 on both.

Update on bigass air compressor, got the unloader controls figured out, the long skinny pilot valve activates the unloaders at 100 psi to stop it making air, and back on again at 85 psi. The square one on the oil pump unloads it for startup and also if oil pressure is lost. I ran it for awhile...

It was the orientation of the slot on the motor shaft that was different, 2-speed, 3-speed or variable on my Dart. It was attached with the nut, but the wipers could not work properly. I forget now how I caught it, I never go out in rain. Your picture, the arm looks to be attached...

I went through about the same thing as you are now. Mine would drop to zero, car would still idle but that was it. This normally took place after I stood on it but, sometimes while just driving down the road. I had about the same set up, all braided lines, new everything and couldn't pin point...

Again, what car are you working on here? These type are also used for console body to floor brackets, fuel filler grommet to trunk floor. I have seen the copper washer type but not on washer tanks.

I have ordered the California Car Cover Superweave for several on my cars. Fits great and is soft. https://www.calcarcover.com/product/superweave-car-cover/3937

Howdy I was going to edit my post but I decided to add a new one. My buddy who has passed had a beautiful 57 Chrysler 300C the only thing that was updated was the braking system, everything else was painstakingly restored. When they went to Utah for shows he seriously thought about putting a...

I’m on my way as well, boarding momentarily. Not sure which project you’re asking about but stop by and introduce yourself when you can. Lee said your Dart sounded nasty. Will try to let everyone know where fmj is situated. I’m just there for moral support. Looking forward to seeing some of...

Brownie point Thursday. Pre-Winter go over on my high school sweethearts car. Guess I need to wash it as well, as some dick turned the brine tanks on right beside her on the 402!

It's hurt good, but I can't afford not to rebuild it.

Was the seal old? Rubber loses its elasticity with age-like we do! Mike

I have a decent pair but one is missing one post.

Care to share the markeplace ad? or maybe the state what state/city/town the templates were locates?

Sorry I was away for a couple of days. Hope you had a great one! :moparsmiley: :usflag: :bday: :usflag: :moparsmiley:

Looks like someone added some filler plates to the inner sheet metal along with an outer plate. I couldn't find much for pictures of mine that would help. I did find one pic of the area when mine was on the rotissarie. No filler plates in mine. I'm sure someone has better pics of the area.

The air grabber is designed to close when the car shuts off. The solenoid opens the vacuum connection when the car is shut off. This way, it is protected from a heavy rainstorm or other stuff blowing into the opening.

We are hopping on our plane as we speak. How’s your project going so far?