Search results for query: *

The felt washers soaked in wheel bearing grease. If it still corrodes it's heat or over charging.

Thats where the confusion sets in. I have the front bracket but there is nothing to attached a screw to. There needs to be something on the console that the screw goes through and then into the bracket. Right now I can stick a screw through the big hole but theres only the hole in the bracket...

It says free shipping on his website.

My version of a certain Mopar.

Did you ask him about a black Friday deal, I think he usually offers free shipping around this time.

The cruise AFR is adjusted by the main jets, air bleeds etc. The main jets will have no affect on the idle circuit. The full throttle AFR is adjusted by the power valve restriction. This is of course over simplified.

My condolenses on your lost friend! RIP just watching news tonight and a small town near here, a dui driver in a tesla just got 8 yrs. for running into the back of a delivery driver killing him! guy was doing about 180K in a 50K said the tesla accelerated by itself, either way shouldn't have...

Espo springs JMO Leaf Springs For Your Car or Light Truck 1940-1990's+

They all suck, are hard to use, are overpriced, and cause collateral damage.

After input from several members here I decided not to go with the Firm Feel steering gear box. I instead am going with the Borgason. I just got off the phone with Bergman auto craft. They are going to hook me up with everything I need to hook up to my flaming river tilt steering. No cutting...

That hole is to reach in and put a screw in the side of the console to pull the 4spd hump away from the gas pedal towards the center of car. There should be a tab that sticks down on the left side of the front consoles mount that is welded to the tunnel. When the carpet is installed over that...

St Louis Spring will make anything you want and generally by the next day. I stopped by one morning and ordered springs for my RR, they called that afternoon and were already done.

Many years ago I owned a Turbo Saab up in KS. At the annual safety inspection the mechanic came back after a while and said to me - I have to check the fan belt for wear and I know it’s got to have one but I’ve been staring at it and I can’t find it? True story.

It seems I read something a few years ago that corrosion buildup on a battery terminal tells you something about your charging system. If the alternator is weak the neg terminal will corrode and if it’s over-charging the pos one will corrode up. I read it on the internet so you have to consider...

Our car had headrests stamped on the build sheet.

My email to james at Detroit muscle tech Messages 19th Nov 2025 @ 8:38 PM sail panel 68-70 charger You said: James why did these not come with the clips? Do you sell the clips? Thanks...

I just got off the phone with Bergeson. They are going to hook me up with everything I need to hook up to my flaming river tilt steering. No cutting required. I got the kit with the pump and hoses as well as a cooler. I also got the kevlar brake shoes and SS PTFE coated brake lines as well...

Yes to Mega Parts, and in the end run, will be less expensive than the 20% discount that you think that you got from Classic. It took me 3 years or so to figure this one out. I don't get anything from Year One or Classic unless I absolutely have to.

I have had good results with the spri.gs that I ordered from Husky Springs in St Cloud Mn. 5 sets and have always fit correct

They may have changed suppliers, but the wiring harnesses I bought from Classic about 4 years ago were all M&H.