Search results for query: *

Does your console look like the one in the photos above? Specifically the large opening on the driver side? Maybe you should post a photo of your console WITHOUT the 4 speed cover plate. It does sound like your console has been cut incorrectly and is missing part of the plastic where it attaches...

The vent tube was broken on my van. Plastic tank, 25 US gallons. When I filled up, fuel would escape out the vent, and create a puddle on the ground. I discovered this half way to Inuvik on the Dempster Highway. Later I dropped the tank, put on a new vent line and made sure it ran up hill. At...

When I hear about the cost of motel rooms, I do not worry about 14 mpg of the Tukvan. Too, we split the costs, so Shirley pays half of the costs. Which means the Tukvan does 28mpg, which is about 25 to a US gallon. We donnot have tne 85 octane here, and the Tukvan does not like it. So 87 is the...

I have 2 727 transmissions in northern Colorado. these are from international scouts. there might be some usable parts inside. FREE...... would rather give them away to someone that can use parts rather than trash em. contact me for location for pickup.

As R/T BOY said to put grommet in, difficult. I removed the vent tube by drilling the spot welds on top of tank to cut the straps holding tube. Installed grommet fished .015 copper wire through the 2 holes where straps were. The wire was to hold the v tube. A shamy way to do it, was just...

Do you know if these would fit Fred Brewer heads? (His heads look like B-1s on steroids) South Bend Ind

Everything has changed since then. 1. Camshaft profiles- much more aggressive than earlier grinds as we try to leverage all the benefits of the .904 lifter, more prone to failure if everything isn’t “right”. 2. Metallurgy and manufacturing- maybe not as tightly controlled as before as we’ve...

68

That is so nice looking. Put a 4 speed in it and I’ll buy it.

Thanks

The tail-shaft bearing seems like a logical place to look. So does engine balance. Was the engine precision balanced or simply put together with off-the-shelf parts?

I’ve got probably what you are looking for. It’s the definition of NOS for lack of a better word. It’s old but never used and still in the box with all the cosmoline and lifters wrapped in plastic. I can post a picture. Not sure what I would want for it or what it is worth. I know that a lot of...

There may be a local spring shop in your area... do some research. No magic in making a spring.

lots of variables to deal with......... it's just part of the task

Random

Measure the combustion chambers, how far in the hole the pistons are. If they are .100 down you would be wise to limit the cam size because a low compression engine won't like a big cam. My go to cam guy is Mike Jones @ Jones Cam Tecnologies. I stay away from all the big name cam outfits that...

Good price, good color

Up for sale here is: a Pair of brand new Speedmaster big block cylinder heads. Part no. PCE281-2153 Located in: Portage Wisconsin Cost to ship is probably at least 50 per head, so approximately $100.00 to ship. Price: $1200.00 for the pair. Includes the proper .650 offset rockers!!! Payment...

That's why I have detailed instructions. It is a great product, but use caution as it is quite strong. Keep it away from aluminum. It will clean a dirty neglected white vinyl top, and that's what this man is after. t has uses, I use caution also. It's not mild. It works great on greasy...