Search results for query: *

I've always used dryer sheets - Bounce - in the interior, under the hood, in the trunk, one on top of each wheel and a few under the hood. I also pour some bleach along each entry point into the garage - just a thin line and about every 2 weeks pour a bit more. Never had an issue with mice in...

My Sr high school car was a 1966 GTO. I bought for $200. It had a decent side dent in pass rear quarter panel. At a time those were tougher to repair. Especially by a poorer city kid. The clutch was crappy so replaced the diaphragm with a Borg & Beck 3 finger style (I believe a Mcleod) I then...

Even those made pre 72 ? Never had a car with aluminum heads pre 72 so idk.

Hard seats in any aluminum head. So no, you don't need lead additive. If it's detonating on the available gasoline, you might need an octane booster.

Nasty gap? If mounted properly the inner top side of the panel fits perfectly to the rounded tops of the clips.

I have a V6 in my Chev pickup. It goes down the road at about idle speed for my SV100 Suzuki motorcycle. The fuel mileage is good enough I never measured it. $50 lasts about a month.

Dwayne: Don't you think 150 on the seat sounds high? I mean, I think of a hydraulic roller taking a lot more spring and the Trick Flow .600" lift hyd roller only asks for 154 on the seat. I would have thought his cam would ask for more like a stock Street Hemi spring? Am I crazy?

Clips I purchased years ago from Year One are soft/flexible and allow the trim to pull away from the body enough to show a nasty gap. A Gap that is the FIRST thing seen when approaching the car. FYI.

I’m trying to decide if I should take my Super Bee to the Netherlands next year when I move there. It’ll be to the south, Limburg area, where the roads are small. Any members here in The Netherlands south area, because if so, I would really like to meet up and discuss your experiences with a...

I have 9 of them if interested let me know

Sorry I must recommend scrapping the idea. Imagine the pleasure of some other upgrade to your car (anything) if given this much effort, time and attention. Consoles rattle, collect junk, and have misaligned panels. They are over rated. IMHO.

Breaking news! Drag Illustrated broke the developing story that Austin, Jimmy and Thomas Prock have informed John Force Racing that they are leaving effective immediately. Conjecture is they are heading to the Tasca camp. Multiple Sources Confirm Austin Prock, Crew Chief Jimmy Prock and...

These are the correct ones:

P,m. Sent

P.m.sent

P.m.sent

Thanks so much! I’ll try all of these things and see how it goes . I’m so thankful for all of the help!

Don't the Stealth heads allow the tappet removal like the OEM heads? Mike

Do the limiters I’ve seen in this thread at at the transmission ears to crossmember satisfy this, or are you suggesting limiters at each end?