• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Order by date
  1. Davefinan

    WHAT IS YOUR SKILL SET WORTH?

    To me , the bulk of what he charged should be for the pressure he was under with all of the engineers were hovering over him while he is trying to concentrate on the problem.
  2. Rob Vaughn

    WTB Transmission crossmember

    Looking for a 1965 transmission crossmember for a Coronet
  3. Just Send It

    WTB 1964 polara 500 parts needed

    OP....I searched through my entire storage Conex, but the only taillights and emblems I've got are for a 63'. :( I could've sworn I had some.
  4. RemCharger

    New B body leaf springs, which vendor?

    Lots! Tall block / crank rods etc etc .. gotta be at least 20lbs And thicker t bars / sway bar!!
  5. Fran Blacker

    WTB 426 hemi crossram air cleaner assembly oem or reproduction

    Don't have one. Are Holley and AFB's do they have the same base?
  6. rix66

    Heater core replacement

    Thanks guys. Not looking forward to the job, but at least, through your comments, it doesn't sound like a real back-breaker. Thanks again
  7. Unkle Krusty

    New B body leaf springs, which vendor?

    Springs can be reset. They need to be in good condition. Many years ago when I put a Dodge rear end in my 37 Ford hearse, it sat too low when loaded. I called the spring guy, on a weekend, he said bring it over to his home. There we jacked it up, removed the springs, reset them ( he did ) and...
  8. Davefinan

    Motorweek: 2026 Dodge Charger SIXPACK

    Nice video , thanks
  9. eldubb440

    66' Belvedere Changing gas pedal

    Adam @68BabyBlue may have some insight :)
  10. M

    Front door window adjustment question

    Hi all, I was reading a few posts on how to adjust window glass and they helped quite a bit. I saw this post where Dad'sbee shows some pics which also helped: Window adjustment question My question is - Is there a way to tilt the top of the vent window outward? When I close the passenger...
  11. 71Beeper

    Factory Appearing Stock Tire (F.A.S.T.) or Pure Stock Racers

    Cudadude, can you post a link to that?
  12. gtxrt

    Camshaft selection for Mild 440?

    not even close. comp is on a 110 LSA and 6401 is on a lazy 114 LSA. 6401 has more exhaust duration which also hurts bottom end and more advertised duration hurts bottom end and a 114 LSA hurts bottom end and the slow ramp speed of the 6401 also hurts bottom end.
  13. chrger1967

    8 year old new tires.

    Its gotta be hard then to find someone who still know how to balance them correctly.
  14. gtxrt

    Camshaft selection for Mild 440?

    they must be good for more than 510 lift.
  15. eldubb440

    Prettiest wrap I've ever seen.

    who doesn't like a good hummer?
  16. torredcuda

    `70 road runner, FC7, 383, 727 It`s waited long enough, finally time to get it done.

    After getting a smaller hone and trying to clean the bores up I realized the rust pits are too deep so probably won't seal well and tear up the new rubbers so I'm searching for better ones. Part number 2881613 if anyone has a couple to sell me?
  17. O

    Happy Thanksgiving FBBO 'to all' so I don't forget, I'm doing it early

    Happy Thanks Giving to all our American neighbours. Kim
  18. cr8crshr

    Reggae Has Lost Another...Jimmy Cliff Will Not Be Down!!!

    Just to add some more to his playlist...cr8crshr/Bill :usflag: :usflag: :usflag: MSN
  19. cr8crshr

    Prettiest wrap I've ever seen.

    Hummer??? The current ones are all fake ones. An H1 is the one to have...cr8crshr/bill :thumbsup: :thumbsup: :thumbsup: :usflag: :usflag: :usflag:
Back
Top