Search results for query: *

Grind the crack then use a low temp Nickel rod like Inconel. Worked good for me on block repairs.

Factory Chrysler 904 driveshaft yoke for 7260 u-joints. Excellent condition. No pitting, and no seal groove on machined surface. No aftermarket crapola. Looking to get $100 shipped to lower 48.

Price drop$150 + shipping

Price drop:$125 + shipping

Does anyone recommend a mechanical pump from a brand / sources other than Carter that reliably delivers the lower 4-4.5 PSI ? My 67 Charger is stock (see info. below) and it has never really run well. I've been chasing fuel problems and have replaced everything from the tank to the carburetor...

December price cut: $150 + shipping

I used to work for Dresser Ind. , we had a bunch of 8 cyl. moble pipeline engines come in one summer that were burnt with the blocks cracked , these blocks broke down the lower cases were still as big as a trailer house. We had a company come in and lockstitch them , I later left water in my...

Guy backed out from selling the car to him... was listed on Marketplace here in Ontario. I thought it was his as well when I asked "so the car isnt' for sale now" thinking he found a guy to do the work and took it off the market.

Dad's bee and Kiwi are correct imo. I have done it that way many times. skip the etching primer, go with an epoxy primer, lightly sand with 400 for an even consistent surface. I have used a lacquer thinner with a damp cloth just enough to wipe clean the surface you want bare aluminum, then clear...

The last month of the year 2025. So, with that in mind, I hope y'all having a Birthday this month have a "Great One" as another successful trip around the Sun is completed!!! ...cr8crshr/Bill :thumbsup::thumbsup::thumbsup::bday::bday::bday::usflag::usflag::usflag:

I am deer hunting on my farm in PA. But, the wire was routed down the driver side rear seat and along the floor close to the door. There should be a long metal cover that forms a tunnel going down both sides of the inside of the car for the wires to run thru.

This is a job you can do. You can't make it worse, so dive in and replace the harness.

Guy called this morning and pulled out of the sale.. wtf......!!!! No, I didn't give him a deposit because I was unsure of the cost for labor and who would take it on, more than an issue of parts. I called him when I got the guy to do the wiring job, and everything was good. It's not now. Damn...

Mopar Competition Leaf Spring - Left I assume you meant these pens, is that right? Could you please send me a link to the hangers I will need to fit these pens on my 1964 polaru b body? By the way, sorry for my English

Thanks. I’m considering Al possibilities at this point.

$1,500 for the air box setup. $500 for air cleaner

I once fried a turkey. Stored the oil in the bottom of a cabinet. Small mouse chewed hole in container. I leave for a 2 week vacation in AZ. Garage and driveway smelled of French fry every time it gets above 70 degrees for 2 summers.

I couldn't find any leaf springs for 1964 B-body on their website.

can you let me know if metal was replaced and if your willing to negotiate

Thanks!