Search results for query: *

Make sure there is a baffle of some sort on the rocker side of those covers. Otherwise the valve will enable the oil to get sucked out.

My wife just decorated the tree after dinner

I installed a Gear Vendors overdrive for my 73 Road Runner 340 (416 stroker) with a 727 automatic. The unit works the same regardless of if it is installed on an automatic or a manual transmission. You can put it in manual mode, and every time you push (or press with your foot) a switch, you...

A 62-65 valve body will not work in a 66 or later trans. They a 2 cable shift, not linkage. The rooster comb is completely different. A 62-64 doesnt have enough room for a park provision in the casting. I currently have 3 Turbo Action reverse manual push button valve bodies. They are not that...

looks like normal condensation to me. you can even see it drip out of the left pipe.

I bought 3 Passion hemi overdrives. Put one in my 440 6pac cuda with 410 gears. Overdrive is very nice now in that car however it is like driving a three speed with overdrive. I’m not sure I would like it as good with 3.23 gears. That said I put one in my 66 Satellite that was a original three...

THIS IS TALENT!!! - YouTube

Yes sir. Made in cast iron and aluminum case for a-bodies, iirc just cast iron for b-bodies. Have a 76 cast iron one in my a-body, a cast iron one on the way for my b-body. Forgot to mention, need to get the correct 3/4 arm and rod for the shifter. These are not the Chrysler truck trans or...

They will just spring back. But what works really well? Heat the area where the contact occurs. If clearance isn't suffcient to get at the area you can uses a ratchet strap to pull the header away from the torsion bar. When its red pry the header against the torsion bar. The result will be a...

RIP- one of the legends from the blues brothers

R.I.P.

Don't forget to add the 25% tariff.

Not a crossram, but FiTech. Make sure it is done correctly, wiring, grounds, in-tank pump, timing control, etc. In-tank pump needs ethanol rated hose, not just efi rated.

"Time is Tight" One of my Favorites, R.I.P. Steve

It's not all negative. I believed the negative hype, done multiple front and rear at this point, in the last few years. Not all original gaskets are terrible. My 58 had nice, flexible, soft, original gaskets front and rear. The windows on it have complex convect curves and no one is making...

RIP

800 rpm drop is HUGE. My rpm at 70 mph used to be 3,100 with the 727. Switching to a TKX with a .81 O/D it dropped to about 2,400 rpm. That 700 rpm drop makes a massive difference, to noise, mpg and mechanical wear. Heck, even 500 rpm is significant. Ask others who've done similar swaps e.g...

I went in my local tractor supply here in michigan last spring, the prices were through the roof, was gonna buy 8ft of chain length and 2 hooks would have been over a $100. looked at several other items similar increases. went to harbor freight up the road little to no change on anything. won't...

I know you want one relatively close to you. But there is a beautifully detailed complete axle assembly from a 63 Polara with tapered axles with a detailed painted carrier and black housing in Littleton, Colorado Facebook. (a must see) 8 3/4 3:23 sure grip new seals and good brakes with drums...

Tell me more. What exactly is the A833OD. Is that a factory Chrysler.