Search results for query: *

cr8crshr/Bill :thumbsup::thumbsup::thumbsup: :usflag: :usflag: :usflag:

I was thinking about giving it a coat of trim black and dry spraying from a distance ,never used satin black . I might order some and due som spay cards tests

3.89 here in Reno NV. Still too damn high!!! cr8crshr/Bill :usflag::usflag::usflag:

We still averaging $2.79 a gallon....

I'll PM you.

They get all goobered up from mud and snow anyway

Wouldn't be surprised if tape or cutting wires disabled the vehicle.

No stud, but Looks like I have 2 of the nuts, and I believe this is the correct blower motor. Please confirm this is the motor you are looking for. Mike

A piece of tape will do the trick

I tried to melt the HC last July on I-75. Stopped construction traffic. Extended. Had to be 100. Then crept for another hour. Quiet.

Just name a hero and I’ll prove he’s a bum. Pappy Boyington

Very nice! Do you remember the model number? And the jack screws are definitely a must for stability. I just hope the tower isn't too tall for my low ceilings. Is it chain drive or? Thank you! Edit: Is this it...

The one threaded hole looks like it is half missing in the photo is why I asked.

You can install them and re-torque the two bolts with no issues. May not be a bad idea to re-torque all the bolts.

Transparent Dulling spray could have been applied to get the desired sheen or a satin black from SEMS would be very, very close.

AMD sells them

I have a 5.7 and a 6.1.....Both pushing 100K miles without a tick. I use the Mobile 1 recommended on the filler cap, Change oil every 5,000 miles and have never heard any ticking. I attribute my luck to the fact that I never let them idle for more than a couple minutes. When I first heard about...

"Illegitmati non carborundum." - "Don't let the bastards grind you down." - Gen. Joseph "Vinegar Joe" Stillwell

Well that stinks. I wonder if the CPU's would go haywire if I capped off the wires to the camera....