Search results for query: *

Interesting, I have a firm feel 2 in my 69 charger with stock pump and firm feel upper control arms , welded Up lowers . I really like it . No slop I ever noticed. Sure beets the uncertainty of the over assist I remember from the sixty's. Made you A hole pucker when diving down narrow city...

Wait til most everyone has "the chip" and ads get beamed directly to their brains.

Only way you don't get ads on pron sites is if you are a paying subscriber. Just putting that out there.

Agree on it being your car... But that plastic plug doesn't really loke finished if you remove the vinyl. It's designed to accept the vinyl, to gill the gap. You can kind of see it in your "after" pic.

Very few that have dodged a couple of bullets in this world get to end up as happy as you are right now, soak it up!! You both did good!!

67 didn't have tail stripes. R/T Could have a horizontal stripe at the bottom of the door level. Don't see too many with it.

That came out really nice!

I have a firm feel stage 2 in one car, and a Borgeson box in the other. Borgeson is easier steering, and no center slop.

I have taken every head to the machine shop (Dave Sarno at SCH Racing Heads) to be inspected and have at least one port flowed. The old stealth heads I blended the bowls and just cleaned up the ports and the shop put a multi-angle valve job on, I believe flowed in the low to mid 290's cfm. I...

The wind driven waves broke up the ice overnight.

Merry Christmas

Pm sent

I woukd just go with ( Lucky ) and leave it at that.

I’m not sure if the Tremec you are referring to is the same one my buddy had but he did not like it. It would not shift at high rpm, he broke it several time behind a 528 hemi. He had to modify it and finally gave up. The gear ratios were not good either. Low is too low for a 3.54 Dana. He had...

Hey Nacho. Not sure I fully understand your question. This is a new AMD Air Grabber hood. The call Out/turn signal bezel is currently not being produced. So you need to buy it used. A rather rare item indeed. The one I bought had no openings. It’s a solid casting! I surmise that the turn...

Be proud! Fantastic job!

Agreed, the first photo I ask to see if online is the trunk floor without any trunk mat present and underside. That tells a lot about any car.

I thought 1968 model year was not straightforward to prove engine and transmission numbers matching? Anyhow I watched the video and knowing what I know about finding these cars in this price range I still say it's a good buy. Getting an appraisal is a smart thing to do to see if the car is...

bump