Search results for query: *

If it's a Saginaw style pump this is for a ford but same idea.

Definitely not as nice as the red one, but remember the red one was $23k more and it was red and a 4 speed, neither of which I wanted. Also, I am looking for a driver, not a car where every rock chip is gonna make me soil my panties. Remember, the red one had a paint mismatch issue on the...

Mancini Racing oil pan I believe this is the 971 design (no stampings) Fits 73 74 spool mount 400 440, I think works for the early and mid applications as well but buyer responsible to verify fit. New in bag, been stored since '93 $125 plus the ride from Rapid City, SD. Thanks

Selling this original radiator and shroud. I plucked this out of my '69 383-2 auto w/AC Coronet and replaced it with the exact same thing but restored. The top tank was seeping when I removed it. Very minimal dents in the thermal fins. Brackets are all straight as the car was an original paint...

Simple as removing the belt and power steering pump. Might need a few spacers to fill the gap of the missing power steering pump bracket but that’s it.

I had a build I was considering several years back, maybe ten, and for a mopar shop to give a set of new aluminum heads a going over was I believe 200-250. I trust the shop and had work done there before. I was told it is not uncommon to check a new set from pretty much all brands and find loose...

Good news! It didn't take me 12 years to make my next update. I made another trip out to PA in September and my dad and I picked up where we left off in June. Before my trip out my dad sealed the car and primed it with some high build to get it ready for block sanding. We also pulled the...

I could do without it as well. I actually prefer no power steering and no power brakes, but it’s an A/C car, and I don’t know if I’ve ever seen a bracket setup that accommodates A/C and no power steering. Were big blocks available with A/C and no power steering in a B-body?

So I was able to work on the transmission over the weekend. All new seals, steels and frictions. Nothing looked bad. Went to put the VB on and nothing but troubles from the park rod. No matter what I did, it kept dropping into the wrong spot, which is a little retarded on the engineering side...

MMM Oak.... LOL

Great job

Love burning oak. It is a bit hard on chains though. Ww never split any of it. As long as the pieces were small enough to go in the furnace door.

I have one out of five with PS... I could do without it !

Few more shots: Lens pictures are before the UV epoxy seal.

We will see... LOL Fortunately 1st Gen parts are available and cheap.. Not sure what I am going to do with it really. Its a 360 4spd which they say "it ran" recently. I might just leave it as it is with the 360, or I might put a G3 Hemi or Cummins 6BT.

Thanks man! I'll PM you.

1970 Hood Signal Restoration. Not seen anyone doing this and so I thought I would share and post. Originally the hood call-out was just that. It didn’t have the factory indicator openings. So they needed to be opened. Used my Dremel with a carbide cutter after opening up. Used the lines from...