Search results for query: *

Yes you can.

I drive 5 minutes to the next town between where I live and work and get it for $2.94-$2.99 for 87. It was $3.39 for weeks while that town was at $3.04. Diesel went from $3.69 to $3.99-$4.19...

The set up in post #1, would result in a hard pedal, but is not factory installed. All factory B body disc brake cars were power.

About the same here near Tulsa. $2.12 regular works perfectly in a late model Charger.

I have a 1966 Charger with a 1973 360 Small block. I'm in the process of installing a Vintage Air AC system. I'm still working on my interior and not quite ready to install the heater box do you all think would be ok to bypass the heater by running a hose from the pump discharge to the return...

Guy Fieri is that you?? :lol:

Would be awesome to see the fender tag....

swedge the end of it (swell it )

Silicone belongs in the bathroom. Get the Loctite catalog out. One of the 600 series products will take care of that. Bearing and shaft locker application.

cperdickhead was disrespectful to the flag and what it stands for . I say for him to go play for Russia ...

hughs engines =melonized steel gear on a billet roller , been running one for about 13ish yrs, ...

I filled the Challenger with 91 octane, premium, non ethanol gas yesterday at OnCue, which sells Phillips 66 fuel, for $3.14 per gallon.

Tony’s parts did reproduce them. Don’t know if there are any left…

was $2.09 for a while , back up to $2.29 , now $2.19 . Will probably go back up when I need gas a again !!

the correct way...

I guess we're supposed to believe that a software engineer can foresee and predict every possible thing the car might encounter during it's lifetime and take appropriate action in every case. Airplanes have had autopilot systems for more than thirty years. They still make mistakes based on...

You really have to be careful with additives. Too much of something like zinc can counteract the additive package in the oil. Running a heavy oil is something for loose clearances. I’d be sure to go over things with the builder if you are looking at 20w-50 or straight 30. Modern oils are much...

This was about 24 inches wide at the base. Some of those pieces were so tough to split so I had to cut with the grain into the log with my chainsaw to get the splitter to go through. Lots of strands kept it together even after being split…I have a shed full of Cherry, White oak, Maple and Ash...

"Welded up lowers" is probably what he's referring as welding pre-fab plates to the underside of stock LCA to add rigidity.