• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. 417guy

    Aluminum intake bolt torque

    Thanks for the diagram ! Appreciate it !
  2. 417guy

    Aluminum intake bolt torque

    Not sure that’s enough. Maybe for the valve covers ??? 25 foot pounds sounds right ! Thanks !
  3. 417guy

    Aluminum intake bolt torque

    Changing my intake to a performer rpm on my 68 383 roadrunner. FSM torque is for a cast iron intake . My heads are still 906 cast iron. Since the intake is aluminum should the torque of the bolts be less ? The same as FSM ? Thoughts ?? Thanks to everyone for advice !
  4. 417guy

    Chrome Magnum 500 Wheels

    Well, mine are not post pandemic, but bought new from wheel vintiques about 2015. The chrome is still great. A few chips on black from changing tires 3 times since then. I notice no vibrations and I drive 70+ on the highway. Just my experience .
  5. 417guy

    A great option for LED bulbs in taillights.

    These require a flasher change ??
  6. 417guy

    A great option for LED bulbs in taillights.

    Did you change the flasher for these to work ?? I’m very interested !
  7. 417guy

    Spark plug with 5/8 hex ?

    It gets driven about 5-6k a year, so I suppose I’m just a little too cautious. Thanks for your comment.
  8. 417guy

    Spark plug with 5/8 hex ?

    I’m using RJ12YC plugs. Looks like a 3/8 reach, 13/16 hex. Have also used Bosch WR9FP,same reach and hex, which are NLA. Thanks for your comment.
  9. 417guy

    Spark plug with 5/8 hex ?

    I remember those, but can’t find any numbers that are 5/8 hex. Thanks for the comment !
  10. 417guy

    Spark plug with 5/8 hex ?

    I usually change the plugs in my 383 roadrunner every winter. Maybe overkill, but I hate to have issues on a long cruise to a show. It has old hooker 1 7/8 tube headers on it, and some plugs are challenging to change. I’ve been trying to research an equivalent plug,but with a 5/8 hex. Spent...
  11. 417guy

    HELP!! Vent Window Seal Problem. What am I doing wrong??

    Did you change the glass setting tape the glass sits in at the bottom of the channel ? Could the glass be too low in the frame . Hard to raise the bottom frame on the vent glass up unless you take the whole window frame out of the door and try to move the pin up that is attached to the bottom...
  12. 417guy

    SOLD 68-70 b body a pillar trim

    I have PayPal, but don’t do the friends/family on it. Here’s what I propose…$50 on PayPal or Venmo and you pay the freight ? Thanks
  13. 417guy

    Under dash A/C with OEM heater OR complete behind dash system ?

    Your under dash unit has heat, too ? Does it have any defrost outlets ? I like the idea of yours, but humidity here in the spring and fall need a defrost occasionally. Nice car and nice work, too !
  14. 417guy

    Under dash A/C with OEM heater OR complete behind dash system ?

    I like the way it looks ! The under dash unit is from Vintage ? All the a/c parts from Vintage ??
  15. 417guy

    Under dash A/C with OEM heater OR complete behind dash system ?

    Ive heard the knee knockers cool great. I can swing the behind the dash complete unit, ($)… just seemed more work, but likely better in the long run. Thanks for answering !
  16. 417guy

    Under dash A/C with OEM heater OR complete behind dash system ?

    Thanks for answering. After more measuring, the under dash unit will extend into the passenger leg room quite a bit. It has to be to the right far enough to clear my shifter, and that puts it mostly into the passenger leg area. . One reason I considered the under dash was it’s so “ Analog”. A...
  17. 417guy

    Under dash A/C with OEM heater OR complete behind dash system ?

    I would appreciate some input before I pull the trigger on A/C for my 68 roadrunner. 95+ % the driving is above 50*. i rebuilt the heater box completely, blasted the metal, new paint, foam, motor, core, etc. it works great. Maybe turned it on low once for some wife’s morning chill in late...
  18. 417guy

    SOLD 68-70 b body a pillar trim

    No other crack or broken tabs other than the one shown ?
  19. 417guy

    Borgeson Update

    I used “ power steering fluid” from O’Reillys. Their brand. Any brand you like ?
  20. 417guy

    Power steering cooler install question

    I’m planning to install a power steering cooler soon, and wonder if it matters that the cooler will be higher than the pump ? I’m planning a spot in front of the radiator, mounted right below the upper core support, hoses going thru the core support, under the battery tray, and to the pump and...
Back
Top