Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Does anyone know if they make a cap to cover the the speedometer side of the Trans?
My Speedo is broken and makes alot of noise. Until I get it taken out I want to disconnect the speedo cable at the trans and cap it.
I checked the runout on the bell housing and it was fine. Turned out when I purchased the Trans at Carlisle, I did not check the outer bearing retainer. Turns out that the one on it was for a small block and a bit smaller in diameter than a big block and the tube was cracked about 3/4 of the way...
Well, after checking some other things, we THINK we found the problem. The bearing retainer on the front of the trans is for a small block. I checked the casting numbers and confirmed, which means that it is about a 1/2" to small for the bellhousing. Going to order the correct bearing tomorrow...