Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
All the current from the alternator passes through the contacts at the bulkhead connector. As the brass wire terminals in the connector age/corrode/become loose from vibration, they become more resistant to electricity flow and that causes heat. With enough heat the connector can melt/fires can...
I purchased a gallon of anodize remover online but, many have said Easy Off oven cleaner will do the job. It did take me more than one application to get the anodizing completely off. This can be tested as you proceed by sanding, looking for the bare aluminum "gray" slurry that indicates...
I used Diamond Power brand from E-Bay. Very cheap but, professionally packaged, looked and spec'd good. Made in India but, they do build 100s of thousands of cars there. I couldn't find any other rod bearings for my 2008 3.8 V-6 so I ordered a set and have 3-4 thousand miles on so far (it's my...
I recently had to replace my never used new Autometer Ultralite tachometer. Just started the car-no tach? What am I missing? I checked all continuities, The fuel pump speed control, tach, and Fast 2.0 all are tied to the MSD tach output. Only the tach does not work. Any guidance fellas.
Mike
Oh ya, they took out the acid (probably replaced it with water). That's why it takes 24 instead of 1/2 hours to soak! I rinse them in my solvent tank and brush the pieces as I rinse.
Mike
I bought a pail about 5 years ago ($125.00) and decided with the low volume of carb rebuilds I was doing now days, I had to add a chemical surcharge to my billing.
Mike
This amount of misalignment may not bother operation if you are not driving aggressively. Belt drives can work with small misalignment, not ideal but, it will depend on RPM.
Mike
You may be able to unhook the return hose at the pump and direct the flow into a waste oil container and plug the tube on the pump. Start the motor and add new fluid while a second person rotates the steering wheel back and forth.
Mike
Not really. Chrysler used the same style gaskets through out the B engine production. Did your machinist finish for the steel gaskets or composition type gaskets?
Mike