Search results for query: *

Dakota Digital dash for 1968 Charger VHX-68D-CHG-K-R Black alloy face, red display new in box $800 plus shipping I bought this dash for my Charger about 5 years ago and never used it. I never even opened the box Current price for this exact piece from Summit is $ 1,135.25 Frank Berger...

Have an 07 2500 5.9 Cummins, Auto, crew cab, 6 foot bed Anyone know about how much weight is on rear axle with truck empty? Need to move 7,000 pounds and would rather rent a smaller trailer and put some tile in the bed Thanks

I have an 07 2500 ram. It looks like the clear is deteriorating . Getting splotchy spots on hood and roof. Truck is kept outside. I think the Arizona sun is the cause of this. Its a low mileage, 80K with 5.9 Cummins so I don't want to sell. So, is it possible to get factory durability from an...

Wanted to go with a different brand tire other than BFG Radial TA so bought tires from Summit. I spoke with Summit rep before purchase and she told me they rotate out their tires every 90 days - so I bought 2 rear tires in 275/60/15 One tire was manufactured in Nov 22 and the other March 23 Also...

68 Charger with late model master cylinder. Brake fluid seeping from filler cap. At first only aft cap seep so I swapped the caps. Now seep from front and rear. I removed some fluid from front and back reservoir. Cap seals are good but still leaks from both. Also brakes don't feel normal - they...

does the steering wheel need to be installed for horn to work? I I used a screw driver to push in the plunger but horns dont work. 68 Charger

Car is a 68 Charger with factory 3 speed wiper motor. The wipers have not been operated for at least 20 years, however, I had the motor rebuilt (Jules did the work) before I reinstalled on the car many years ago. Currently dash is out to facilitate other maintenance so I thought this would be a...

Car is a 68 Charger. I removed the instrument cluster and surrounding trim to gain access to windshield wiper mechanism. I found this on drivers side floor this morning. it was partially wrapped in electrical tape. The tape is old and pretty much just fell off. When I removed the instrument...

I want to run a wire from alt to battery and I want to run it under the intake manifold. 511 stroker with Holley Street Dominator manifold. Car has Sniper and Hyperspark. This adds a lot of additional wires under the hood. Its Easy enough to run a wire along valve cover to firewall but it just...

Bought new 15x8 Wheel Vintiques with a 4.5" backspace. When I checked the backspacing on the wheel and my figure is 4 3/4". The pic shows where Im measuring from. Am I missing something here or are the rims actually 4 3/4 ?

68 Charger with Sniper. The 10 micron filter was leaking. Its Holley 162-550. After removing and draining all fuel I blew through the filter to check for restriction. It felt restricted/clogged. I had another exact filter, blew through it, and it felt normal. So I installed the different...

400/512, Trick Flow intake, Trick Flow 240 heads. All parts installed new out of box. Low mileage engine, 300-400 miles since built, probably less. Putting smaller intake on so hood can go back on. When I removed Trick Flow intake there was oil on the intake/head mating surface. Oil is on both...

69 GTX with air grabber. Can the hood inserts be removed without removing the under hood air grabber stuff?

69 GTX with original Dana. Cover was leaking. When I pulled off there was foam in the diff. Is this normal?

Saw this on a car I think at the Nationals this year. Could not hook up with the owner. Is this a custom setup? Anyone know where I can get one?

Have a 68 Charger that I want to get to 11.5 in quarter. I don’t know what the car weighs but should be a few hundred pounds less than stock. The car has: 400/511 440 source stroker 600HP/650TQ at 4500 RPM on pump gas 727 (sportsman series) built by Protrans. Billet internals, reverse manual...

I'm looking to install a fiberglass hood on my 68. I need extra space for the intake I'm running. Looking for a manufacturer recommendation. Frank

Pulled distributor. This is what I saw.

I had a hell of a time removing old pickup from 440. Finally got it out yesterday and went to install new pickup from 440 source (part # 121-1056). Now the issue is I don't think the the threads on new pickup are NPT. They are are different from the pickup that came out of the engine. A Milodon...

Need some advise. I cannot get the oil pickup tube out of this 440. Engine was built in 2011 so its been there for about 13 years. This is a 1/2 inch tube. The machine shop who built the engine enlarged the opening to 1/2 so I have to assume it was done correctly. I have tried vice grips...