Search results for query: *

Finally getting back on my 65 coronet. Put a running 318 from a 1986 Diplomat in there. Looking to upgrade to 4 barrel intake. What new aftermarket intake and carb would you all suggest? Looking to get the car up and running soon due to work ramping back up. Thanks!!!!

I put a 318 from an 87 Diplomat in my 65 Coronet. I'm trying to figure out if I can use the original carb or do I need to find another aftermarket carb? it has the lean burn system on it. I'm assuming I'll have to change the distributor also. I was up to date on this but life got in the way and...

I replace the factory poly 318 in my coronet with a 318 from a 87 Dodge Diplomat. The problem I'm having is on the factory 65 engine the lower radiator hose outlet is on the driver's side. On the 87 engine, the water pump outlet is on the passenger side. Also the power steering pump is mounted...

Pulled the poly 318 engine from from 65 coronet. Replaced it with a 87 Diplomat 318. Outlet on the water pump is on the passenger side. Was wondering if I could put the 65 pump onto the 87 engine? Thanks!

Selling my 1994 Silverado shortbed stepside. 350 V8 with automatic transmission. 104k miles. New tires. Bench seat. Gray interior. Rebuilt title due to being hit in rear bumper and cracking fiberglass bed next to rear bumper. No frame damage. New bumper. Asking $3600.Located in Glasgow, Ky

Running 360 engine out of a 96 Ram 3/4 ton truck. Trans was slipping and I parted the truck out. Also have a 360 engine out of a wrecked 98 Dodge 3/4 or 1 ton. Both Engines still have the transmissions hooked up to them. $350 for both. located in Glasgow, Ky

Running 360 Engine and automatic transmission that is still in a 96 2500 Ram truck. 2wd. Doesn't smoke but the trans take a second to go into gear when its cold outside so I'm going to assume it needs work. Bought the truck for body parts. $300 for the engine, trans and accessories on front of...

Pulled the 5 speed trans out of my 99 dodge ram 3/4 ton to have it worked on. Waited on the trans shop 6 weeks to finished. Another week to find the time to put it in. Started the truck today and it barely idles, backfires once or twice while idling then dies. Just wondering what would make it...

65 Coronet 500 from California. 318 auto with power steering, power brakes and air conditioning. Heads and intake are off the engine. Engine is almost ready to pull. Bucket seats, console, floor shift with factory tach. Seats need to be redone. Rebuilt brake booster with new master cylinder. Qa1...

Is a flywheel from a poly 318 automatic 65 dodge the same bolt pattern as a la 318? Search the forum and didn't come up with much. I'm assuming so but just wanted to make sure. Thanks!

Looking for a 318 to swap in a mid 60's dodge car inorder to get the car to move under its own power. Found a 1985 fifth avenue that has a bad trans. I can buy the car for $500 but I looked online and its only 150hp. The factory engine in my car was 230. Wondering what the hp gain would be with...

Getting disgusted with my progress on this car so I decided to see if anyone might be interested in it. 65 Coronet 500 from California. 318 auto with power steering, power brakes and air conditioning. Heads and intake are off the engine. Engine is almost ready to pull. Bucket seats, console...

Sorry if this has been posted but I was checking out youtube and found this. Ray Evernham built 64 Plymouth.

Did some searching on here trying to find where to get a shifter cable for my 65 Coronet. Car is floor shift. I'm replacing the small block with a big block and am going to use a 66 and up trans. I see Imperial services have a cable but several customer have had bad experiences with them. Does...

Putting a 383 in my 65 Coronet and looking for a 65 or 66-70 big block transmission. I have a 73 C body BB trans that I may could do some type of trade. located in Kentucky but may could travel to surrounding states. Pm with any help. Thanks.

Selling the 318 engine, trans, and driveshaft out of my 63 Plymouth Belvedere. Engine has been disassembled. Car has been sold. $100 for everything. Located in Glasgow, Ky. 42141. PM for any questions.

Needing a front fender trim spear for my 65 coronet 500. Driver's side.

Driver's side bucket seat of my 65 coronet has no give at all. Is there any company that makes springs or rebuilds the bucket seat? I've tried searching the forum but didn't find anything. Thanks!

Finally decided to go big block on my 65 coronet. I have a transmission that came with my big block and was told it was from an e body. Wondering if I should use it or find a 65 cable shift trans? I know I need to buy a special shifter cable for the later transmission for my floor shifter.

Trying to find a running engine for my 63 plymouth. Friend of mine has an 90 dodge with a throttle body 360. I was wondering if a regular intake will fit right on? I've also researched and see that the 90's magnum engines made better hp. Can they be converted to carb pretty easily?