Search results for query: *

Will these sizes work? 69 Coronet! Ready to get steel Magnum 500’s From Coddington. 15x7 4.25 BS. 15x8 4.5 BS. 225 70 15. 255 60 15 Is anyone running these sizes? are there any rubbing issues? Also thinking the BF Goodrich TA’s Appreciate the help in advance...

Appears only new 54 series Mag 500 steel are made in China! Has anyone made a recent purchase of these and could share your opinions? Thank you in advance dcmason69

Anyone have or had experience with the Legendary aluminum wheels? Looking to maybe get 15x7 and 15x8 rims. How about the finish on these are they polished with clear coat? Also if you went with the bullseye caps they say they are press on! Can anyone elaborate on this. Thanks in advance...

What is a good shade of black and brand for ramcharger duct work? Satin, flat, or semi flat Used Eastwood under hood black satin for brackets etc. But thinking a little too glossy. Any help appreciated! Thank you in advance

What is correct bolt setup for 69 Coronet bucket seat hinge ? Top pic has 5/8 shoulder and bottom is 1/2 the 5/8 are marked with a N and no markings on 1/2 “ Also any other washers besides the repo fiber ones from classic ind. Between hinge and seat? Thank in advance dcmason69

Sail panels in 69 Coronet Does the bottom edge tuck in along edge of package tray or sit on top ! Tray will have sound deadner under it ! So it will sit up 1/4 to 5/16 off shelf How did these come from factory? Thanks in advance dcmason69

Purchased rebuilt large frame starter from Oreillys Notice if I flip it end to end it feels like the armature is sliding back and forth! In my mind there shouldn’t be that noticeable. Did not see any info in FSM on this Iam Leary to put in. This is the 1.8 3 and 3/4 housing can anyone...

One end of my drive shaft is tapered down about 5 inches from one end. Which end goes towards front of car? Not a virgin just want to be sure before I install! 69 Coronet 727 8-3/4 Thanks in advance dcmason69

What is correct color for 69 R/T Coronet park lamp lens/shroud ? All silver or silver inside and black outside? I have one of each plcked up at meet! Thanks in advance dcmason69

Looking for proper routing path for neutral/park - reverse lamp harness on my 69 Coronet! Down firewall and follow along top of Tranny ? Or over booster down apron and along Speedo cable? Auto/power brakes Thank you dcmason69

This question is directed to dadsbee A while back I saw a thread that you used aVHT roll bar and chassis black for your cleaner base Was that a satin or gloss ? Thanks in advance dcmason69

What is too high battery for a 69 Coronet N96 hood? Can a person use a 8 inch tall battery and be ok? Looking to put a AGM in

Joey How do I empty my in box Said Ian at my limit of 15 Thank you dcmason69

Any one have a source for the correct size washer squiter hose for 69 Coronet? Measures about 1/8 Id. 7/32 Od. Thin wall. Thank you dcmason69

The nozzle hose across cowl has 2 holdown clips do they both point back or the right side foward and left side back ? What is right dadsbee? Thank You dcmason69

Restoring rear license plate bracket on 69 Coronet, what did these look like from factory as far as paint or plating? Had to take mine apart from the pivot pin and spring in order to straighten both pieces has old black paint on back side but I don’t believe it’s correct! Any help...

What’s a good quality upper and lower Rubber bushing? Iam thinking it’s probably a crap shoot anymore, mostly all manufactured over seas ! What have you guys used that you had the best fit and quality ? MOOG. FROFORGE MASTER PRO MOV0tech AC DELCO and the list goes on. Thank you...

Which cable is preferred steel or stainless steel? Is the stainless a pain to work with will it lay the same as stainless? Need help deciding what to buy Thank you

Looking for I believe should be a non vented gas cap for 69 coronet ! Do I have to spend 40 bucks to get one that works or can I get a lesser price for one that seals and doesn’t leak? Classic ind. 8 dollar cap leaks. Which one works? I will spend extra money just need to know which one to...

Need help deciding which new e brake cables to buy. OEM steel or Stainless steel? Anyone have experience with them? Naturally I would think the SS is best But my experience with SS is could be stiffer / harder to work with and not lay as the factory did ! Has anyone put on SS? And what was...