Search results for query: *

Doing a swap from a four speed to an automatic. Need a complete automatic brake pedal assembly. Thanks in advance, Eric

Purchased the complete set up from Silver Sport Transmission. Its been in my 68 RoadRunner since November 2024. Everything is included for complete install minus the oil and driveshaft(might be willing to sell) This is very easy to install and it's a complete kit including clutch(Centerforce)...

Looking for a decent, driver quality or better Wood Grain Steering wheel for my 69' RR. Thanks a lot, Eric

Looking for a PS/Tilt Steering Column floor shift. Thanks for the help, Eric

I am in the process of converting a 4speed 68' RR into an Automatic...Looking for complete center console set up with shifter. Any help would be greatly appreciated. Eric

Afternoon, Looking to buy an automatic console for my 68'RR...I am swapping into an automatic from a 4speed. I appreciate the help, Eric

Looking for a stock complete pinion snubber for 68 RR 8 3/4 742 case...Thanks in advance. Eric

I am looking for a bracket for my vintage air compressor that will allow it to be used with the 440+6. As some of you may know, installing the bracket that came with the system is too high once mounted and interferes with the +6 air cleaner. I know they have to be out there. Any help or remedies...

Looking to buy a nice M1 intake for my 440. Let me know what you have. I appreciate the help. Eric

Afternoon, 68'RR, front bench seats. On the driver side, when you fold the seat forward so someone can get in the back, it falls off the pivot point on the left by the seat belt next to the door. Is there suppose to be an "E" clip or something to keep it from unhinging there? Any help would be...

Evening, Looking for a passenger side only door locking mechanism pull/push. Greatly appreciated. Eric

Looking for a dash light dimmer switch for my 68 RR... Thanks in advance. Eric

Evening Guys, Looking for the parts shown here...Any help would be appreciated. Eric

https://www.legacy.com/obituaries/heralddemocrat/obituary.aspx?pid=197505840&utm_source=facebook&utm_medium=feed&utm_campaign=heralddemocrat&utm-content=197505840 For those of you who knew him...This guy helped a lot of people find the parts they needed for their projects.

Looking to buy a pair '68 RR front bumper parking lights(both housing and lens)...appreciate the help. Eric

Installing my grill on the 68'RR...What does the bottom right driver side and bottom left passenger side headlamp screws mount to? Please see pics. Thanks for any help. Eric

Have a 68 RR and just installed the engine/trans under the car. All 4 K member bolts aligned and started. But the rear motor mount is about 2-3 inches off from the transmission crossmember mount. Any ideas here? 69' 440 with an A833 18-spline transmission late 69. C99129

Have a 68 RoadRunner 4sp with bench seats...Looking to add 3 point seatbelts for the front and rear; what are my options? Earlier or later year belts welcomed if they will fit. Thanks a lot for the info. Eric

Looking for the rear/passenger side bumper bracket. Any help greatly appreciated. Eric

As the title states, looking for the Cross Ram intake with the long runners that came on the early 60's 413 engine. Let me know what you got... Thanks a lot, Eric