Search results for query: *

Hey guys, I mocked up my Lakewood bellhousing to check for runout and here's what I got. The top is +.012 and the very bottom (hard to see) is -.002 I removed and remounted the dial caliper and checked it a second time and got almost exactly the same thing. From this I should be getting a...

Hi Guys, I'm looking for a shop near me to finish up the restoration of my 71. looking for rear quarters to be replaced, body to be blocked and painted, headliner and vinyl roof I don't want my car to end up in body shop jail!! Hopefully someone who can do it over next winter

Disney/Discovery f**ks up another great channel. I've been watching Roadkill and the other associated shows since they first started streaming on youtube 12 years ago. Great business model Disney. Buy great content then kill it with gross mismanagement. 'Roadkill' Is Finished as MotorTrend...

Hey Guys, I've been having an intermittent issue with my front drivers driving/blinker light. The bulb socket is pressed into the pot metal light housing using that press fit/swedge to ground the socket. Over time corrosion has built up between the socket and housing. causing an intermittent...

For sale is the 8 3/4 I recently took out of my 71 Charger. Fits B bodies from 71-74 (stock dimensions) It is complete drum to drum 489 center section with cone type sure grip crush sleeve eliminator kit Richmond 3.55 gears forged 1350 10 spline yoke from Dr Diff Green bearings Pinion Snubber...

I purchased a pair of OER sport mirrors for my 71 Charger. They look great but the passenger side mirror is kinda useless. The glass is not the convex type (ones that usually say objects in mirror are closer than they appear) It's regular mirror glass so it's pretty much impossible to see much...

Just got back from the only driveshaft shop left in the Lower NY, upper NJ area. Needed to get my driveshaft shortened a bit for the new S60 rear. Shop gets GREAT reviews and, let's face it, they're the only game in town. Just under $300 to lose 1 1/8" Whole damn driveshaft was only $500 new...

WARNING! Rant on here! ok, Maybe I'm just an old fart with unrealistic expectations, but here it goes.... On Tuesday I order over $500 worth of parts. The Vendor says they have them in stock so I send the $$ via PayPal (not friends and family). The Vendor has a good reputation this board so I...

Guys, I'm looking at getting the MSD 8732 step controller to pair with my MSD6AL. Their instructions show using a relay so that the 2 step will activate with the clutch switch and line lock, releasing both with the clutch is dumped. Has anyone done this? I already have a clutch switch on...

It was a long 6 weeks from ordering to receiving my new S60!! I had actually gone to the local shipping depot to pick it up on Friday but they couldn't find it. That was a little frustrating but luckily the found it and called me this morning so I went back to pic it up. Now I have to get my...

Hi All, I finally bit the bullet and order a new S60 from Dr Diff for my 71 Charger. I want to make sure I have all the parts I need so I can get it in the car as soon as I get it. The car currently has an 8 3/4 What is the tube diameter of the S60 vs the 8 3/4? Do I need new shock...

All, The AC / heater control on my 71 Charger is leaking pretty bad. I ran a smoke test into the vacuum line coming from the engine compartment and smoke poured out of the a/c heat control switch. I've had it disconnected for a while because I knew there was a leak, I just never dove into...

Hey all, I'm looking to upgrade my 8 3/4 for something stronger. I'm afraid I'm going to destroy my 8 3/4 while dumping the clutch on the dragstrip. I know Strange has a great S60 setup but I like the option of having the removable gear sets. Speedway Motors has a Fabricated Ford 9" setup...

Hi All, I'm looking for a Lakewood Bellhousing with block plate for my RB with A833 Let me know what ya' got. thanks

Hi All, So I took The Beast down the 1/4 this past weekend at Island Dragway in NJ. I had a ton of fun. During tech inspection the inspector asked if I had an SFI bellhousing. I do not. (I have a 4 speed and twin disc setup) I thought it wasn't required unless you ran faster than an 11.5 as...

I took The Beast out for a drive on this sunny spring day. Shifting out of first and into second under moderate acceleration I feel a pop in the shifter followed by the sound of something dragging on the road. I immediately slow down and pull to the shoulder and the car hops a bit and I come to...

So, I'm driving through town to a buddies house in my 2015 RAM when I see police lights behind me. I assume they're going to another scene as I haven't been pulled over in 30 years and I can't think of a thing I was doing wrong. I pull onto a side street to get out of the way and dang it it all...

Hi all, I’ve been racking my brain and trying everything I can think of but my 505 build pings pretty good under load. The motor only has 1500 or so miles on it but the issue seems to be getting worse as it gets driven more. Here’s the list of things I’ve tried: - I have a Wide Band O2 gauge...

Apologies if this belongs to someone here.....but come on!! 1969 Dodge Charger

I found this on my local Facebook market place. I'm hoping he didn't cut it in half just to get the engine out, but I have a pretty good hunch he did. Obviously has no idea how much the fenders and doors are worth. (and I need a good passenger door). Dodge Mopar 360 motor