Search results for query: *

I have a few questions on exhaust for 1970 road runner 383 - what are the correct finishes for the muffler and tail pipe hangers and where can I buy correct ones? I also would like to run 2 1/2" pipe all the way back but I know a correct exhaust tapers down to 2 1/4" before the muffler. Does...

The spec I have is 40 ft/lbs but that would be for stock rubber bushings. Should I use the same spec for urethane bushings or would it be different?

Need two things- first is dimensions for holes for relay on firewall as I neglected to get them before doing some repair work in that area. Second is pics of cowl contour as I know mine is caved in but not sure how much - is it almost flat or is there a curve to it looking from the sides?

Need a factory driveshaft for my `70 road runner 383, 727, 8 3/4 - 51 1/2" long with 7290 u-joints. I am heading to Carlisle so anyone there or along the way from New Hampshire going I84 to I81.

Guy does it with green bearings but should be the same for tapered bearings, seems a bit crude but looks to work just fine. Doesn`t say what diameter pipe he used but I can measure that.

I know this is a super long shot but before I hand fabricate patch panels anyone have good pieces to repair the areas?

My road runner didn`t come with a driveshaft and it`s currently under restoration so I can`t measure. I know I can have one made but would prefer an original one, what is the length? If anyone has one local to me (New Hampshire) or going o be at Carlisle selling one let me know. 1970, 383, 727...

E-bay description says they are exact to NOS, but are they? Inline tubes also has a kit but they don`t say how correct they are? Pardon Our Interruption... 1970 Mopar B-body 3pc Rubber Brake Hose Kit, Drum Brakes, 9pc Any other sources, I just need the hoses, don`t need the tee?

If you have been following along I`m working on a `70 road runner ( thread here- `70 road runner, FC7, 383, 727 It`s waited long enough, finally time to get it done. ) and I have a couple decisions to make. I am doing a 90% stock resto on it with a couple add ons like an air grabber hood and...

I have two different ones here but not sure which one ( or either ) is correct for my 8 3/4? Does it matter which plant and/or date? Mine is St Louis, December 1969.

Called Mancini and they told $330 for tapered axle bearings and they would have to order them, DR Diff has kits but I need just the bearings or bearings and seal kit, who has quality ones (Timkin or??, NOT chinesium) them at a decent price?

What are the correct finishes/colors for leaf springs, hangers, brackets, u-bolts, shackles, bolts etc. for a `70 road runner, St Louis built?

Homemade rotisserie used on my '70 road runner, may fit other B- bodies or modify the mounts to fit other vehicles as one end is adjustable for length. No hydraulic jacks and has hand crank for spinning, large caster wheels for moving. $600 or best offer, will consider trades for Mopar stuff or...

I'm not sure if this is the original housing but found these markings, do they look original for a '70 and what are they/ what do they mean?

I need to do my wheel wells and inside of quarter panels, I don` need concours correct but want it to look pretty close to the factory stuff. Resto Rick says one gallon and a quart to one gallon and a half to do all that but is only sold by the gallon so I would need two gallons at $103 a piece...

I have the firewall diagram but want to figure out which holes are factory and which ones are not as previous owner(s) drilled a bunch of "extra" ones.

I found what looks like sprayed black paint on outside of the front frame rails near the control arm mounts. I would have just ignored it thinking some previous owner spray canned it but when I removed the lower rubber bump stop I could see it was there before it was installed. Judging by the...

Getting ready to spray my undercariage on my `70 road runner and need info on the bolt on dual exhaust hanger - was it bolted on before or after undercarriage was primered and if after what is the correct finish for the hanger and nuts?

Wanting to get an old touched up and modified - anyone that could do that for me?

I am currently having lot`s of fun (NOT!) cleaning and sanding the underneath of my road runner getting it ready for paint. I want to replicate the factory look which means gray primer with body color overspray, I`m not looking for concours points but just want it close with as few different...