Search results for query: *

hey i am trying to replace my universal brake booster, new booster has square bolt pattern 3 3/8 x 3 3/8 but the one on the car tath is leaking the pattern is 3 3/8 x 1 3/8. so can i find the replacement 3/38 x 1 3/8 or can i keep the squre bolt pattern an d just dill the right pattern...

hey i need to order a replacement booster i would like to make sure i get correct one. should the firewall bolt pattern be the same master cylinder. 3 3/8 x 3 3/8. i my can measure it from inside but its very thigh and awkward . i think i have a 7 inch dual booster from speedway motors . was...

hey my pass. door will not open, both locking mechanisms are connected and locking and unlocking. the inside handle and outside handle are connected. the door will not move at all. also it looks like the rods are moving freely and they move the release as far as can be , however the view is...

they look real nice. however we are being rained on for two weeks so i got no new pics . and still worse to wet to drive.

hello. i just got my new magnum 500s on my car ordered them on 1/18/21.cooper cobras too. 1450 total. i got two tires for 100 dollars . they are nice 15 x 7s with 215 x 4. i do have 2 inch lowering block s on the back i would like to be gone. my question is for correct u bolts ? i measure the...

hello my new wheels got here this week 15 x 7 s for my 67 coronet . i have two cooper cobras 15 x 215 r70 . my concern is fitting on the front with out rubbing. my current tire and wheels are crager 14s with 205 r75 and the back has 2inch lowering blocks so it is very low that's why i what to...

hello, i would like some new tires and rims for my 67 Coronet . i have front disk pw.brakes with 14 inch original spinners crag-er ss's and try are very old. would like new set of magnum 500 factory wheels with GT radials all around . can i get p235/14 front and rear? or do i get p225/15...

what GM module to use on a 440 to convert to GM ign. this one is for sale at o'reillys ............. Warranty: Limited Lifetime Warranty Unit of Measure: Each UPC: # 91769018009 Terminal Type: Blade Connector Gender: Male Number Of Terminals: 4 Terminal Gender: Male Voltage (V): 12...

hello everyone, its finally cooler here and getting to be a good time to ride. i just had a complete rear drum brake job on my 67 coronet and i test drove it . i hear both side making noise from shoes to drums in reverse and forward,,,,,,,,,,,,,,, and it heated up wheels and drums, is this...

hello everyone. i tracked down new MC and it is identical to old one same maker , however all of the port are 3/8 . other one had brass inverted flare fitting 7/16 i think.... male then brake line (o.d. 1/2) . so i assume i need a 3/8 male into MC with a female 1/2 od. to screw brake line. i...

hello everyone i am having some brake issues right now . on several occasions at low rpms when slowing normally like for stop signs or rr tracks the brakes will not grab and pedal is very soft goes all the way to the floor. kinda scary but i manage to stop without troubles so far. i have power...

hey everyone i am having a little problem with my 67 dodge i have a 440 with a 727 floor shiftier automatic . the only problem is a slight slipping when it shifts from 2nd to 3rd. and it gets worse as the motor heats up and less when the weather is cooler. the reason it started is because...

after new volt reg and a volt gage install took 67 out all was ok been watchen volt gage charging very high like 17 plus when at 55 . but with a load test using all electrical function on car volts drop to 13. .5 ............... so i smealded smoke the bad kind wires burning up so link is fried...

hey i got my car from the farm so to speak as the owner had acess to farm oil so thats what they put after redoing motor the rotella t4 15-40w. on my other dodge truck 2006 i use full syn. mobil 1 5-30w. and on other 67 440 i hadi used mobil1 20-50w. and i am thinking of taking the rotella out...

hey please read other posts on voltage issues;.........however had voltage reg tested and it failed so i got a new one and installed it with a good ground to the motor. and checked all connections. my factory harness is in good shape as far as connections goes. factory terminal on alternator...

well i had battery test at napa and oriellys and they say its a good batty. 771 cca on load teat.............. alternator output up to 12.9 at high rpms.................took car out this morning for gas and drove about 25 mins and about 20 miles but on return to home no bleekers and so ni loaded...

hello i have had a flat battery for last few fews so i pulled the alternator had it tested and found it to have a bad bearing and the output was about 11.58 on store tester. i have install a new liftime napa alternator and the output at battery is 12.26 and when testing just battery level is...

ok so i think i lost all off my fire from dist. i have 12.95 vts on my battery so it hot i have fire to both sides of ballast (single element with 2 wire plugged each side) drivers side lower and other. coil is new and has fire when key . new rotor and cap , spark plugs new also. fire my be...

i am still having starting problems with my 67 , we did get some fire out to the plugs but no start. however we did find choke plate stuck and plugs on the 2 we pulled looked full of gas. gona try start in the morning see if it will crank . and i guess change the plugs i just got the car so i...

hello, been out of the game since 2003. just got a 67 coronet w/440 with slight build. so as i dont know much about this motor. it does have a small cam and 40 over pistons with eldobroch intake and carb 650 i think. test drive it never missed a beat. it has a b&m floor ratchet shifter, if...