Search results for query: *

Does anyone have a picture of the fuel line routing over the axle? 67 coronet rt I pulled the old one out, but can't seem to get the new one in. I really need to take pictures before taking stuff apart...

I rebuilt my first 727 this past winter, finally got it in and did the test drive. The kickdown linkage is correct, and adjusted properly. I added a tf2 shiftkit while i was cleaning the valvebody, I am wondering if there is something that I could have assembled backwards or wrong that would...

I have a couple of afbs that have stripped threads where the fitting for the fuel line goes. The fittings that I have seem short to me, there is only a couple of threads that would have engaged in the body of the carburetor. Does anybody know of a fitting that has a longer threaded part?

I am in the process of doing my first 727 rebuild. The failure that caused the need for the rebuild was in the clutch pack with the belleville spring, the spring broke in half and fried the clutches and even toasted the plastic spacer. I assume the converter is full of junk friction material...

I am going through my transmission and noticed some damage on the separator plate. Looking for advice, do I need another plate? Maybe this is a normal thing?

Does anyone have experience using solid mounts? Does the height of the engine change vs stock? Dad has a 426 to put in his 67 coronet rt 440 car. He heard that the solid adapter mounts bump the engine height up. Thanks

was talking to the guy that owns the local hardware store and he told me he had a 79 lil red express in his barn. The truck looks really nice in the pictures he showed me. Almost no rust at all. The interior looks great. Under the hood is all original and complete. It is wearing it's original...

I was talking to the guy that owns the local hardware store and he told me he had a 79 lil red express in his barn. The truck looks really nice in the pictures he showed me. Almost no rust at all. The interior looks great. Under the hood is all original and complete. It is wearing it's original...

I am working on some afb carburetors and there is fuel on top of the venturis where theyvscrew into the carb body. I can't tell if it is coming from where the fuel transfers across from pass side to drivers. I have 5 psi on the pressure guage. The floats are set correctly. Any other ideas?

I built a 505 with stealth heads using a cast iron dual quad manifold from tthe early 60s. On top I have a pair of edelbrock afbs. The problem I am having is that it will not adjust down to a reasonable idle rpm unless the timing is really retarded. The idle speed screws are backed out so they...

Does anybody here have a good starting point for primary/ secondary jets and metering rods for a pair of edelbrock 1405's?

I am in the process of repairing a cooler (Hemi) for a freind of my Dad's. I am wondering what kind of pressure it will see in operation so I can pressure test it. Thanks!

I have a 4 post car hoist for sale. If it doesn't sell locally by Thursday it will be at mopars in the park swap area. I am unsure of the mfg. It will need a lift cable and possibly some hardware. I am looking to get $1200/best reasonable offer. I have a video of the pump running that will not...

I need the bracket that connects the wing window frame to the door in my 67 coronet. Driver's side The photos are of the part on the pass side.

I need to install new bearings and seals and the adjuster on my axle was beaten within an inch of it's life. The threads no longer thread together very well. I figured it would make sense to try to find another before I spend the time attempting to repair the threads with a file. Thaks!

Has anyone here used the seals from DMT? Mine are a little weathered so I'm thinking about buying these.

I am looking at a 300m. The owner says that the shift cable is bad and will not shift out of park. Do any of you have experience with this?

Does anybody here know Paul? I sent him money for parts and have not heard from him. I hope he is ok.

I am looking for a piece that goes up the side of the windshield on the passenger side. If someone has just that piece that they could spare, or an entire set, i am interested. Car is a hardtop

I am looking for a used bottom seat cover for one of my bucket seats. Long shot here, but I am wondering if anybody has installed new seat covers, and has the old covers. I just need something that is usable. Thanks