Search results for query: *

Hello everyone working on a 73 318 mild cam fresh rebuild ,after first start up got motor running,broke in cam but can’t set the timing can’t find the Mark when engine is running.Damper is good if I turn it over by hand line up Mark ,number 1 is at top dead center,I have distribtor pointed to 1...

Happy Hoildays getting ready to fire up a73 318 ;rebuilt by previous owner I was priming the motor today,I have a bad oil leak at filter housing ;I put that together I have a gasket for outside edge the double sided nut that screws into block to hold filter plate The other side the filter screws...

My cars a 73 Barracuda,can’t log on to the e body site ,anyway anyone have a picture of the spring install on the floor shift linkage it’s the fwd where the rod goes down through the floor ,my book is a 70 can’t find a picture thanks

Looking for good brake booster for 73 Barracuda I’m in Ct ,project car wasn’t with parts when car came it’s disc /drum rear car thanks I’m on Ct

working on 73 Barracuda tranny already rebuilt its a 318 mild cam ,Parts Geek list a converter but says 727 after it ? Does the 904 use the same converter ?? Its just a cruise night car thanks Gregg

What’s a 1969 RT worth ,car has to be done over needs a trunk floor ,the normal paint and interior,guy wants to use it for trade on car I’m selling 7500 to 10,000. ??

Happy New year first off ,putting together a 69: Roadrunner 4spd 440 car it was an auto switched it over to a 4SPD ;engine is a a used 69 440 steel crank good heads ;my question finding 1 cyl on cap ;myself I normally get engine on compression stroke turn over until it lines up with 0 on the...

First off Merry Christmas to everyone,enjoy your time with your family,working on 69 Roadrunner ,it has a used 440 steel crank motor it’s a 69 did the first start up tonight,weather bad in Ct tonight,deep freeze any way engine sounds good but dosnt seem to want to take the gas ,it will idle ,it...

Hello all ,working on a new project 69 Roadrunner,swapping it over to a 4spd ,thought all was going well but ,I’m using a bellhousing 2892626,bought a used 833 had two mounting places for shifter so I think it’s a 70 or newer ,couldn’t find a date. On it the front bearing carrier is to big in...

Hello anyone have a good used flywheel for a 69 440 I’m in Ct 143 tooth thanks Gregg

Looking for a picture of 4spd shifter linkage 69 Roadrunner swapping my car over to a 4spd bought used 833 with used shifter bought dog ears from brewer think the 967 is reverse 891 2/1 and 068 4/3 ,I saw a picture some just can’t seem to find it again thanks Gregg

Hello All trying to get some glass back in my drivers dr ,car is a69 Roadrunner it’s a post car ,I can’t find those plastic guides that snap on glass that slide into vent window Assy Anyone know where to buy them ?Dont see them in the Classic Catolog thanks I have a picture thanks again Gregg...

WTB Hello looking for a LH aft window track for a post car 68-70 should he the same my car is a 69 thanks Gregg im in CT. Track is for LH door

Hello my power steering box is out of a 73 challenger it’s leaking out of the big end where that toothy looking nut ,holds it together,any one ever change that seal ,can’t find a rebuilt one in stock to change mine out thanks,car is drivable but leaves a puddle when it sits

Hello all ,someone replied to my add last week for clutch pedal assy for 69 Roadrunner,I cant find the message ,so I put another add up ,mount had oversize holes if you could PM again ,would be great ,not sure why can’t find my reply thanks Gregg

Hello all looking for clutch pedal assy for 1969 Roadrunner ,new project is an auto car now looking to swap it to a 4SPD car

Hello ,picked up a 69 Roadrunner last week would like to convert it too a 4spd need pedal set up ,4spd shifter and clutch fork ;zbaror bell crank ? Thanks Gregg I’m in ct

Hello picked up new project 69 Roadrunner looking for shifter with rods and Zbar car is an auto would like to switch to 4Spd already have a tranny and Bell housing thanks I’m in CT

Looking for driveshaft for 70 Barracuda 440 auto car big u joint 83/4 rear I’m in Ct though I ask before I have one made thanks Gregg

1970 Roadrunner 440 auto on floor new top and interior,recent paint needs minor finishing ,moved on to new project ,Engine has new top end ,TTI exhaust 30,000 I’m in Ct06770