Search results for query: *

Question for the foot brake guys. I'm going to be putting my car on the track next year (fingers crossed). 66 coronet, 400cu +.030, foot brake, nothing crazy, just some fun on the weekends. Currently have OE style drums (all four corners) 10" x 2.5". Does anyone have a source for HD...

Working on a 66 coronet, originally a 318 car, now it has a B-Block installed. The torsion bars measure .885" on D/S and P/S. The adjusters are backed off to the point they are just making contact, and there's no weight on front end. My question is, can anyone offer a good starting point for...

Looking for possible idea to track down for an issue (maybe it's normal). 66 Coronet, not really a street car, rough idle, built/building the entire wiring harness for the car. Starts and runs fine, running lights, hi-low beam, gauges, elec cooling fans, elec fuel pump. Everything works, but...

Looking at picking up a set rear tires so I can move the car around, and put it on the road for a little testing/shake down, 66 Coronet with 10" slicks on it right now. I live in a rural area and have to travel about a mile to get to the black-top. So, I'm eye balling a set of 255/60R15 to put...

Looking for a set (two) of 15 x 8 wheels for my 66 coronet. I have 10 slicks on it right now and need to put streetable tires on the rear axle. Would like to find a set of slotted wheels (police) to match the front, but it's not critical. Would really prefer to pick them up within a...

Just curious as to what idle I can expect to achieve with the following set up. Right now I have it at 950-1000 rpm at operating temp, doesn't seem to want to go any lower, but I haven't really got into tuning yet. I just installed a MSD 6AL to work with the MSD distributor and my super...

Did a quick search and didn't find anything about this question, specifically. My car, 66 coronet 500, console shift. I'm setting up for weekend duty at the track only, I'm going to be installing a B&M shifter. My question for the guru's is: is there an access panel of some type that is...

Small fuel cell, came with the car I'm building. Previous owner must have had some serious speed plans. It was installed in the trunk but never used. Don't know brand, or where it came from. I believe, from it's size, that it's a 3 gallon cell. It has anti-slosh foam inside. I think it...

Tracking down cause for a no spark condition. So, since I'm not a auto electrical guy, I'm learning as I go. I've checked for voltage at the ECU, the Ballast resistor, and the coil + side. I get 12 (plus) vdc at the ECU connector, the Ballast resistor, and almost 12vdc at the coil until I...

Anyone ever have a pick up coil in a MSD distro go bad on them? I'm in the process of of tracking down the cause of a no spark condition, and just read about some folks having issues with the MSD coils? The distro was bought a few years ago (new), installed last year and the motor fired at the...

Question for the VIN guru's regarding my car, 1966 Coronet. As best as I can tell from the VIN, WP23E65****** (W) Dodge 117"/118", (P) Premium, (23) 2 Dr Hardtop, (E) 6 - Special Order, (6) 1966, (5) I have no clue, then a 6 digit assy number. 2 Questions: Does anyone know what "6 - Special...

Just throwing this out there, saw it on CL. https://centralmich.craigslist.org/cto/d/six-lakes-1970-dodge-challenger-a/7718781549.html

So my experience ends with a few windshield installs. I'm working on the door glass for my 66 coronet 2DHT. I had to by a new piece of glass for the PS door, and have to install what the factory parts book lists as the frame. It's the SS edge trim piece that the rear quarter window seal seats...

I'm installing the hardware on the door glass for my 66 coronet (2dr HT). I'm starting with the glass and a hand full of hardware pieces. I didn't take things apart, so I'm building from zero. Anyhoo, most of it's straight forward but the parts kit that I got from DMT has two nylon rivets...

Looking for P/S door glass for my (driver) 66 coronet 500, 2dr hardtop. Would love to find one in the mid michigan area, for pick up. Thanks for looking.

More for the beginner, wrench turners know this progression well. :lol:

66 Charger tail light assy, minus wiring harness. The lens is rough, cracks and holes (see pics), most of the original lettering is there. The mounting studs are all there, need to be wire brushed to clean of the years of stting stuff. The housing is in great shape (see pics), the chrome has...

This came with my 66 coronet, I will not be using it. I believe it will fit other b-bodies, but I'm not and expert on that. It is complete as far as I know, but it has been cut on (see pics). It has both of the courtesy lamp housings and the carpet trim pieces, as well as the bolt on tail...

This came with my 66 coronet, I will not be using it. I believe it will fit other b-bodies, but I'm not and expert on that. It is complete as far as I know, but it has been cut on (see pics). It has both of the courtesy lamp housings and the carpet trim pieces, as well as the bolt on tail...

Rebuilding my elec fuel pump, an older Mallory unit (series 140). I haven't had any issues but I do have a couple questions. 1. When you put things back together, do you coat the pump internal working parts (pic 1) with anything, some type of lube? It seems to me that the steel pump parts...