• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. roadblock_us64

    WTB Gear Vendors Unit for A833 or 727- Will buy just a tailshaft(not the diesel 727)

    If someone has a Gear Vendors they want to sell or would sell, please get in contact with me. I can provide references here and in the hobby. If by chance you are sitting on a short or regular length Gear Vendors 727 tailshaft and coupler- I'd like to buy one. I'd even take one for an A-833...
  2. roadblock_us64

    WTB Wanted 340+6 340 Six Pack Intake 340 Six Pack Carbs 340 Six Pack Setup

    For a brief period in between 1997-2005 there were some runs of aluminum reproduction 340+6 manifolds. Some were Edelbrock Marked and some were marked with an MP part number. I want to say that the carbs were reproduced especially for the 340+6 but it may just have been that run of Holley...
  3. roadblock_us64

    WTB Wanted: 1970 Dodge Charger Fenders or Fender (I will buy them one at a time if neccessary). Also: complete 1970 Console, auto shifter, linkage

    I will buy one or a pair of fenders. The one I need most immediately is the driver side fender. I also want to buy a complete 1969-1970 B-body Console including the top plate, shifter, and linkage. I am in far South West North Carolina. Thanks all very much ! -yer pal Roadblock
  4. roadblock_us64

    WTB Wanted: Complete Gear Vendors 727 Unit or Will take a Gear Vendors 727 Tailshaft

    I am looking to pay $3000 for a used or new 727 Overdrive Gear Vendors Unit. I have one in my Jensen Interceptor, I have one in a 'Cuda. I have a gear vendors tailshaft for diesel 727 I'd trade for a regular gear vendors tailshaft adapter for a 727(can be short tailshaft or long regular...
  5. roadblock_us64

    I'm planning on becoming a supporting member. Before I do, is it possible that I change my username ?

    If I could have figured out a mod or site admin I would have just pm'd and asked. I didn't plan on using the forum as much as I have. That's changed. However, at the time I created the account, I wasn't focusing, and I do not now, or then, have an internet "handle". However I do have a name I...
  6. roadblock_us64

    WTB RB Six Pack Intake and 3 Reproduction Carbs

    I'll pay $2500 and $125 shipping. Maybe more if I can get a set of linkage for a 727 auto car(carb linkage and the kickdown) I don't want an original set and I don't care if the carbs were reproduced in Timbuktu(Ibukedone)- my Weber IDF copies are basically identical to the original IDF's, when...
  7. roadblock_us64

    WTB Wanted 440 6 Pack Six Pack Intake and Carbs or can buy just carbs and intake, do not want restored set

    WTB: 440 Six Pack Setup, or just individual pieces. If anyone needs to let a set go and it is NOT restored, not costing my left nad, first born child, or a kidney, please let me know what you've got and how much. I don't want one of the Rochester or Zenith knockoff intakes. I am talking about...
  8. roadblock_us64

    WTB Wanted 1973 1974 Plymouth Roadrunner Bulge Hood & Left & Right Front Fender (Fenders) - Southeast, SW NC, SE TN, N GA, NE AL

    I had my 1973 340 Roadrunner sustain damage due to a neighbor's Bradford Pear tree, I had already sent him a registered mail notice that it was a nuisance tree per NC law. That's supposed to make me good, her home policy is supposed to pay for the damage, or I can file on my umbrella policy...
  9. roadblock_us64

    Kelsey Hayes Recall Wheel- Reproduced ?

    Back up until 2004, I was an active poster on Moparts. A member on there began reproducing parts that were nearly impossible to get and for that matter- extremely expensive. My vague memory says he started working with a guy who was either in Peru or Brazil and had a 71 Cuda. They did...
  10. roadblock_us64

    WTB Wanted: 1970 Dodge Charger Hood(I am in far SW NC): Can Be Factory Metal, Carbon Fiber, Fiberglass, Element 115...

    I need a 1970 Dodge Charger hood. I will take one that is factory metal one needing repairs(more often than not they need repairs as they are 54 going on 55 years), factory one in great condition, fiberglass, glassfiber glass fibre carbon fiber , carbon fibre. I'm using variations of spellings...
  11. roadblock_us64

    58 tooth reluctor series engine: efi and spark management-

    I have a 2008 6.1 in 1971 car. I use an intake no longer made- it was one of the first dual plane single four barrels. The 32 tooth reluctor engines have been absolutely thrashed. It appears Prefix is winding down. I've heard that they are putting their funds into a motorsports park, I told...
  12. roadblock_us64

    WTB WTB: American Racing or any Manufacturer 15x7 to 17x7 200S aka Daisy aka Coke Bottle Rims. Need 4.750 or greater Backspacing, will take 4.500

    Dear Mods- I realize this is a WTB, as such if I screwed the pooch on placement please, please, please move to the appropriate forum in lieu of outright deletion, I will never ask this again... For 15's I will go 600 + 200 shipping. I understand the price goes up. Prefer non-polished but then...
  13. roadblock_us64

    WTB WTB DC/MP P4120960 Hemi Heads or Mopar Performance P5153875 Hemi Heads - will buy one or a pair

    My preference far and away is the P4120960 head as offered by Direct Connection. I'd take a single head but I prefer a pair. Failing that I will consider a P5153875 pair of heads. Given the age of P4120960 heads, they almost always are o-ringed and are ported and it's a wonder if they don't...
  14. roadblock_us64

    WTB WTB: Stage V Mopar B/RB Conversion: COMPLETE HEADS to Full Conversion, take either one

    I am looking for either one- the complete heads from valves to the rocker arms and rocker stands to a complete conversion kit. I have a Mopar Performance Big Bore Water Block, it is RB Height. That's what I will be using the heads with. I can provide my contact info through messages. Thanks.
  15. roadblock_us64

    WTB WTB: Stage VI non-MW port head

    I am in North Carolina. I have a pair of Mopar Performance Stage VI heads I'm using for a build and a spare. I want one more head to have a matching pair for spares. That way if anything happens, I can swap a matched pair for a matched pair. Thanks very much !
Back
Top