Search results for query: *

Hi. I need to replace a power steering gear box for my 65 Satty. Anyone recommend a good supplier? Not looking for super high performance steering. It’s a street driver. Little history in case it matters. It was born with a 360. Somebody put a 318 in it before i bought it. Now, I’m putting a 440...

Hi. Does anyone know how I can find out whether the vent window frame on a 64 Sport Fury convertible is the same as the vent window frame on a 65 Satellite convertible? Will the part numbers be the same? Thanks for any help.

Looking to buy the driver side vent window chrome for a 65 Satellite convertible. Thanks for your time.

Howdy. Does anyone know whether the thin dashboard trim strips on a 65 Satellite will interchange with a 64 Sport Fury? Pics looks very similar. Thanks.

Howdy, y’all. Would like some help identifying the k-member in my 65 satellite. Below are some pics of what’s currently installed. Does anyone know if this is a ‘65 v-8 k-member? It looks more like a 66 or later. Thanks.

Hey, Guys. I’m going to put a ‘72 440 in my 65 Satellite. It was a 361 car originally. They guy who had it before me put a 318 in it. I read in a thread or 2 about similar swaps. But i’m still a bit confused. Hoping y’all can help. What all do i need to do on the front end? I can get a rebuild...

Hey, Guys. I'm going to drop a 440 in my 65 satellite. The car was born with a 361. But then someone put in a 318. I understand all big blocks (318-426w) will work on that K frame without modifications. But will a 440 fit onto that K frame without mods? Can I simply use the 440 mounting brackets...

Hey, Guys. I'm working on a 65 satellite convertible. I'm trying to decide on wheels and tires. I really like Cragar wheels. I've seen some pretty cool builds having 15x8 wheels on rear that look great. But i wonder if anyone ever tried 10" wide wheels on a 65. Would you have to move the leaf...

Does anyone know whether 65 Fury bucket seats will work in a 65 Satellite? Any mods required? Thanks!

I'm in the process of taking apart the front end of my 65 satellite for painting/body work. Lots of the bolts/washers i'm taking out of the hood hinges and fenders are in rough condition and should be replaced. I suppose i could go to a hardware store and try to match my hardware piece by piece...

Does anyone know a source for moulding fabrication? Having had no luck finding repro or OE pieces for convertible moulding for my 65 satellite convertible, I'm wondering if there might be a shop that can repair the set I have. One complication is about 1/3 of the driver's side piece I have is...

Hello, guys. I recently saw PG is now carrying convertible well trim for a 65 satellite. Hallelujah. I've had no luck at all locating these 2 pieces over the last several years. They're pricey. But i'll probably go ahead and do it. Equally elusive is the rear 1/4 trim that spans from the door to...

Here are some choice Mopars swimming in a sea of Mustangs and Camaros (ad nauseum) at the Charlotte swap meet this weekend.

Hey, guys. Little help if you please. I'm putting a set SRP flat top pistons with no markings and valve reliefs that look identical into my 440 block. Can anyone tell me how to detect the correct orientation on the pistons? I understand the valve relief "eyebrows" go toward the inside of the...

Hey, guys. I wonder if I could get some advice as to what cam button to order for my 440 build. I've installed a Lunati roller cam. I'm going to run a double roller chain. I see a few choices out there (nylon, aluminum, roller type, etc.) regarding cam button spacers. I'm planning on a stock...

Hey, guys. I just layed a crankshaft in my 440 block. Can anyone tell me how to tell when to tell when the thrust bearing is correctly aligned? I tried moving the crank back and forth with screwdrivers to properly seat the bearings before tightening the #3 main cap nuts. But i couldn't tell much...

I wonder if I could get some help from you folks in determining the best heads to put on the 440 i'm building. I'm looking for 450-500hp. I took a '73 block, bored it .030" over and had it align bored. I'm currently assembling the bottom end and would like to get advice on what heads can get me...

Hello. I just happened across this site and love mopars. I just got my first project car- a 65 satellite convertible. It needs quite a bit of work but the body & frame are solid. First thing is to take the 318 out of it and put in a bigger motor. I'm looking for a big block. Is the choice always...