Search results for query: *

Found a pair of doors on e-bay that were advertised as fitting `64 Fury/Coronet/Belvedere hardtop models. I know that the `64 and `65 Coronet and Belvedere doors were all the same. I THINK the `64 Fury doors will also fit my `65 Belvedere hardtop but would like a second opinion. Thanks...

I'm looking for a pair of decent doors for a 65 Belvedere hardtop. I think the 65 Coronet hardtop doors will also work. Maybe the 64 B-body doors too, but not sure about these. Doors don't have to be perfect - I can fix minor rust and dents/dings. Can anyone out there direct me toward a...

I'm rebuilding the front sway bar assembly on my `65 Coronet and am looking for replacement bushings. (part #'s 1824935 and 1731341) I'd like to find some NOS bushings but would also settle for repops. Does anyone know who offers these? Also, anywhere I can find a good drawing/photo of the...

This question probably applies to all cars but since I'm building a `65 Belvedere thought I'd post it here. Completely rebuilding all of the drum brakes - both front a back. Dumb question, but do the smaller pads go on the front half of the assembly or the rear half? (I should have paid more...

I need some advice on where to buy inner tubes and what sizes to get. The first set is for my `65 Coronet. I have a set of four NOS 7.75x14 Power Cushion tires. Next is a pair of 8.2x15 M&H Racemaster slicks (28" tall). The final is a pair 7.10x15 (28" tall) skinny front tires. Any help...

I have a pair of fenders from my `65 Belvedere that I no longer need. Building an AWB car and will go with a pair of fiberglass fenders. The original steel fenders are super straight but do have a small (easily repairable) rust spot on each. I hate to throw them away but don't really want the...

I'm looking to use a pair of original (circa) `65 M & H Racemaster 8.2 x 15 slicks for my AWB project - `65 Belvedere. I'd like to mount them on a set of 7" wide wheels that I have but want to make sure 7" is wide enough. I can't find any tire-to-wheel info on tires this old. The car will be...

I'm lookig for a company that can restore the steering column in my `65 Belvedere (column shift, cable shift 727TF). I checked wit SMS as they had restored the column in my `65 Coronet and `76 Belvedere but they said they don't touch cable shift columns, so i need to find another source. Any...

Anyone know where I can get a copy of "Journey Through Hemiland" by Pete Haldiman? I've got a copy dated April 2003 but apparently there was a second issue dated June 2004 which had a lot more info (sketches, photos) of the first altered wheelbase cars, which is what I'm looking for. I've...

I'm looking for a RH lower quarter patch panel for my `65 Belvedere. AMD, not the cruddy stuff sold by Sherman metal (none of their stuff comes close to fitting, but maybe that's my lack of metal working skills). I checked with AMD and they said that they stopped making the lower 1/4 panels and...

Looking for am good used manual steering unit for my `65 Belvedere. Will a late 60's (68-69) A, B E-body unit bolt in and fit up in my `65? I'm travelling and don't have access to my interchange manual. Thanks! Steve

Is anyone reproducing the correct battery cable clamps for the `64-`65 race hemi trunk mounted battery? Thanks, Steve

Anyone know what code (number) was stamped on the rear axle tube for the 1965 Dodge Coronet (w/ 3.23gears)? I think it's in the sales code book but can never seem to make sense of the numbers. It's something like "282" or "286". I'm have a stamp made up to restamp the rear axle tube and would...

Here's a question for you really old guys - with good memories. I'm recreating one of the `65 Chrysler factory constructed AWB cars (`65 Belvedere) and wondered if anyone know what the factory did with the torsion bars. Since the K-frame was moved forward 10", the torsion bars had to be 10"...

Most of the HVLP paint guns I've had/used/seen list operating pressure "at the tip". However, the only place that the pressure can actually be measured is at the inlet to the gun. How does inlet pressure compare to tip pressure? I've generally looked at the spray pattern to adjust the gun but...

I'm looking for a `65 cable-shifted 727TF with the big block (RB) housing for my `65 Belvedere? Doesn't need to be working - just complete and re-buildable. Thanks, Steve

Trying to restore my `65 Coronet back to original condition. I'm desparately looking for some H-head engine assembly bolts (ones with the splayed "H" stamping on the head). Primarily need intake manifold bolts but need a few others. Primarily 3/8" dia. coarse thread. Dig through those old cans...

What size arm rests were used on the `65 Coronet 500 hardtop? I've got a boxfull of arm rest bases of varying sizes and trying to determine which ones to re-chrome. There are three sizes: (a) 10" lg w/ ash tray cutout, [P/N 2490016/7] (b) 11-1/2" lg w/ ash tray cutout [1211 VZ1 LH/RH] (c)...

Okay, here's one for you REALLY old guys out there. I'm restoring a 426W powered `65 Coronet back to showroom condition and I'm trying to determine the manufacturer and type tires that originally came on these cars. G. Govier's little book, lists a 7.75-14, 4-ply tire with a thin whitewall; I'm...