Search results for query: *

Mine also sat high until I adjusted it by "massaging" where the pointer is using a calibrated knockometer....

Here is a side by side comparison between a '70 b body (on the left) and '66 (on the right). There are a few minor differences (holes) but I think they are basically the same due to 66-70 b bodies being the same platform. You can cut and section a piece in if need be, that's what I did on the...

Hello Wile E. Coyote, the two indentations on the firewall between the heater box nuts is where the canister mounts and the hoses route through where the indentation above the heater hoses are. I hope this helps. (At least that's how it was on my RR)

Welded in some patches... onward and upward! :)

A little more massaging and it should be good to weld in. :thumbsup:

So I ran into a bit of a head scratcher. It appears that the wheelhouse halves weren't spot welded together, but rather a continuous fuse weld. Any ideas how to get it apart? I think I may need a plan B that I don't have right now, lol.

Did a once over on the motor... I think it has very little run time on it. No ridge in the cylinders, bearings look almost new, lifters and cam look brand new. Found a set of 440 source heads locally that were never used, so I picked them up. Just buttoning it back up.

working at removing/replacing outer wheelhouse...

Is this what you're looking for?

I ran into the same problem. I ended up cutting the floor pan down the middle to get it into the car. It wouldn't fit because it's a post car. I welded it back up no problem. I don't think it matters which way you cut it. Hope this helps!

Have you looked at Trivago, Steve? I know last year you could get rooms fairly cheap a week before the show in Carlisle just off I81. Just a thought.

Thanks RM23U0A. It is going to get interesting, dad was diagnosed with Vascular Dementia about 6 months ago, but I have a bad feeling that it is Alzheimers. I have pretty much moved everything to the new place, so now the work can resume. I will update with the hood shenanigans when I work on it...

Hey gdrill. Yes that is a new floor... and rear footwells.... and firewall corners....and inner fenders (southern).....and (southern rear quarters off of a '67)... and rear half(trunk/trunk extensions/rear frame rails/rear cross member/trunk lid....). hmmmm... maybe I should start a thread on...

Number 2 ready for the trailer...

Thanks gdrill. It wasn't too stressful, I had it strapped down tight enough it didn't move an inch. Moving at night was better, not so much traffic. It may be another month or so before I can get at it, I have one more car (you'll like this one!) to move and it is dependant on the weather (which...

- - - Updated - - - Tah Dah!! It made the trip in one piece! YAY! lol

Thanks Ron, I haven't been doing too much to it lately, I decided about 3 weeks ago that I am going to retire at the end of the year and move closer to my parents. They are getting on in years and are starting to need help around the house, so I am buying a house (with a MUCH bigger garage) near...

That's Awesome! Sounds like you had a kick *** weekend!