Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1969 Dodge Superbee. My Temp and fuel gauges and instrument cluster lights do not work and I have no power at the fuse block at that terminal. Question is where does the power come from to the fuse block for the instuments and dash lights?
I need some advice on fuel line size to a 440 six pack engine. I am going to run 3/8 line from the tank to a filter then to the pump and regulator. My question is being the feed lines to the carbs are 5/16 on the six pack set up where do I need to stop with the 3/8 line? Do I run the 3/8 all the...
I have the M&H wiring harness for the electronic conversion. It has the five pin connector for the ECU and four wires for a dual ballast resistor. I'm I correct in that I can use a four pin ECU and two pole ballast resistor with no problems?
I am switching over to electronic ignition on a 440 six pack motor. I have purchased a 440 source distributor and am going to purchase a rev-n-ater as soon as they come off back order. What voltage regulator and alternator ( single or dual field ) do I need? Do I need to still use a resistor...
On a 69 superbee the dash harness attaches to the bulkhead into the engine compartment. There are three places for harnesses to connect to it. One is the forward light harness and one is the engine harness. My question is what is the other harness that connects to it?
Thanks